Other
N341462 · 2024-07-24 — The tariff classification of thermal transfer ribbons from Mexico
Additional information was provided via email dated July 22 and July 23, 2024. The products under consideration are thermal transfer ribbons in rolls. They consist of a thin layer of plastic film coated with an ink (a color pigment, such as black or any other single color) transfer layer on one side and a backside coating. The thermal transfer ribbons will be imported in jumbo rolls and in smaller sizes.The width of a jumbo roll will be 910 millimeters (mm) and the length will exceed 15,000 meters. The smaller rolls are wound around a cardboard core, measuring 31 (mm) to 105 mm in width, or…
N295121 · 2018-04-04 — The tariff classification of thermal transfer ribbons from Spain and other countries.
Two samples received from the previous correspondence were examined and disposed of. You state thermal transfer ribbons come in a variety of single colors with a variety of widths and their use is dependent upon the specific print machine being utilized. Two representative samples were provided. Samples AR12SIR50 and AR36PM15 are two colored thermal transfer ribbons wound on two core rolls. Two notches were cut out on each end of each roll. You explain that “[t]he notches are cut to fit into a hub on each side of the printer with a pin. This hub turns when the printer is printing, allowing…
N232110 · 2012-09-04 — The tariff classification of thermal transfer tape and thermal transfer ink rolls. Correction to Ruling Number N215455
This replaces Ruling Number N215455, dated May 25, 2012, which contained a mistake of fact. In the original ruling request you described item A-1400HSA as being composed of cellular polyurethane on rolls. You have now stated that the polyurethane is noncellular and you have provided a sample. A complete corrected ruling follows. In your letter dated April 25, 2012, on behalf of Avery Dennison, you requested a tariff classification ruling. Three samples were provided with your letter. Item A – 1400HSA is described as single-sided heat seal polyurethane thermal transfer tape. The tape is said…
N215455 · 2012-05-24 — The tariff classification of thermal transfer tape and thermal transfer ink rolls
Three samples were provided with your letter. Item A – 1400HSA is described as single-sided heat seal polyurethane thermal transfer tape. The tape is said to be composed of cellular polyurethane film on rolls. It does not contain any textile material and is not self-adhesive. It will be used in the manufacture of labels for footwear and clothing. At the time of importation, it is not printed and it does not contain any wax or ink. Item B – 10D013050 is described as a thermal transfer ink roll. It is composed of polyethylene terephthalate (PET) film with wax/resin ink applied. The ink roll…
N094576 · 2010-02-24 — The tariff classification of Thermal Transfer Ribbon from Japan
In your ruling request letter on behalf of DNP IMS America Corp, you indicate the following: Fist you state that “the item in question is a spool of thermal transfer ribbon which is used in a thermal transfer printer to produce labels for various industrial products, such as electronic parts, chemical drums, and compliance labels for the automotive, steel and apparel industries. The labels require printing that can withstand friction, moisture, rubbing, solvents and heat. These labels most often use a 1 dimensional barcode symbology. The thermal transfer printer, or barcode printer is used in…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product