Of polyethylene
N338502 · 2024-03-19 — The tariff classification and eligibility of the United States-Mexico-Canada Agreement (USMCA) of an irrigation drip line system from Mexico
The merchandise under review is referred to as an Irrigator Mantle Technology (IMT). It consists of low-density polyethylene (LDPE) drip lines with equidistant perforations to allow for irrigation. The drip lines do not incorporate any fittings. The drip lines are fused to LDPE film via perforated LDPE sleeves. This drip system will be used in the mining industry. The system will be spread over leaching piles. The dripper lines will allow for the leaching agent to drip at equal intervals along the pile while the film will create a greenhouse effect resulting in less water consumption and…
N337783 · 2024-02-09 — The tariff classification of items used for hobby maple syrup production imported from China
The items include the following: 1) HSS Twist Drill Bit, 2) Plastic Elbow Fitting (Spout), 3) LDPE Tubing, 4) Paper Cone Filter and 5) Recipe Cards. You have stated that all the items, other than the Recipe Cards, will be sold both as independent products as well as being bundled into kits containing some or all of the items. The recipe cards will only be included with each of the kits. Item 1 is identified as a HSS Twist Drill Bit. The drill bit is made of full ground M2 (6542) grade steel, with a chemical composition of over 0.1 percent Vanadium. It has a diameter of 0.3125” (5/16”) and is…
N332345 · 2023-05-04 — The tariff classification of polyethylene hose from China
The product under consideration is described as a flexible condensate drain hose. The hose is composed of low density polyethylene. It will be imported without fittings. It will serve as the condensate drain hose for a mini split air conditioning system. The applicable subheading for the polyethylene hose without fittings will be 3917.32.0020, Harmonized Tariff Schedule of the United States (HTSUS), which provides for tubes, pipes and hoses and fittings therefore (for example, joints, elbows, flanges), of plastics: other tubes, pipes and hoses: other, not reinforced or otherwise combined with…
N260306 · 2015-01-02 — The tariff classification of heat shrinkable lay-flat tubing and bags from Japan
The two samples provided with your request are identified as ML40 shrinkable plastic film casings. The film comprising the products is composed of multiple layers of coextruded material. The layers include polyethylene terephthalate, polyamide, ethylene vinyl alcohol and polyethylene. You indicated in email correspondence that the polyethylene predominates by weight. The casing is available in the form of lay-flat tubing as well as in the form of bags made from the tubing. Both forms are used for enclosing cold meats or cheeses to preserve their freshness during transport and storage. The…
N257400 · 2014-09-30 — The tariff classification of lay-flat tubing from Brazil
Photographs have been submitted in lieu of a sample. The merchandise is identified as FFS (Form, Fill and Seal) tubular film or lay-flat tubing made of polyethylene using blown-film extrusion. The tubing is usually printed according to a buyer’s specifications. It is gusseted and lightly embossed. The film gauge varies according to a buyer’s specifications but is typically in the 140-180 micron range. At the time of importation the tubing is open at both ends and wound onto rolls approximately 40 to 50 inches in diameter. After importation the tubing will be fed into a Vertical Form Fill and…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product