Of polymers of vinyl chloride: — Other
N337887 · 2024-02-26 — The tariff classification of polyvinyl chloride film and poly(ethylene terephthalate) film from China
Samples of each of the films were provided and will be retained by this office. Item 1 is referred to as UV Blue Film. The sample is a thin transparent film noted to be composed of polyvinyl chloride (PVC) with a thickness of 0.08 mm. It will be imported in rolls. Item 2 is referred to as UV Sticky Film. The sample is a two-layer film noted to be composed of a 0.075 mm polyethylene terephthalate (PET) film with a 0.013 mm polyurethane acrylate coating attached to a clear acrylic release film. It will be imported in rolls. After importation the product will be combined with the UV Blue film to…
N300297 · 2018-09-04 — The tariff classification of V-FABIMP-CLF86 PVC Clear from China. Correction to Ruling Number N299966
This replaces Ruling Number N299966, dated August 10, 2018, which contained a clerical error. The Harmonized Tariff Schedule of the United States was changed on August 23th to reflect additional duties on certain imports from China. That information was not reflected in the original ruling. A complete corrected ruling follows. In your letter dated August 10, 2018, you requested a tariff classification ruling. You submitted a sample of the product to our offices. We are retaining the sample you submitted for reference. The subject product is indicated to be a sheet of PVC plastic which will be…
N299966 · 2018-08-24 — The tariff classification of V-FABIMP-CLF86 PVC Clear from China
You submitted a sample of the product to our offices. We are retaining the sample you submitted for reference. The subject product is indicated to be a sheet of PVC plastic which will be imported in rolls. The rolls will be 86 inches wide by 100 yards long. The sheeting weighs 18.5 ounces per square yard. You indicated in a follow-up email that the plasticizer content of the sheets is 3 percent. The clear plastic sheeting will also contain approximately 8.1 percent of other materials such as a flame retardant and an antibacterial component. The PVC content is 91.9 percent. The clear sheeting…
N281092 · 2017-06-02 — The tariff classification of plastic sheeting from China
Representative samples were submitted and sent to our laboratory for analysis. The products to be imported are two types of plastic sheeting which will be used in the manufacture of display banners. You indicate that these rolls will be imported in widths of either 64 or 102 inches. Sample 1, identified as “13 oz. Stay Flat Vinyl”, is comprised of an inner layer of polyethylene terephthalate/urethane coated on both sides with polyvinyl chloride (PVC). It is the PVC coating that makes up approximately 70 percent of the product’s composition. Sample 2, identified as “13 oz. (.441 kg/m²) Vinyl”,…
N278958 · 2016-09-30 — The tariff classification of panels and planks from China
A representative sample was submitted with your request and will be returned to you under separate cover. The products under consideration, which you refer to as HDPC (High Density Plastic Composite) panels, are actually solid polyvinyl chloride (PVC) panels and smaller planks containing less than 1.5 percent of plasticizers. Available in various surface textures and sizes with thicknesses up to .25”, these panels/planks are intended to be used as wall coverings. The applicable subheading for the panels and planks will be 3920.49.0000 , Harmonized Tariff Schedule of the United States (HTSUS),…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product