Not reinforced or otherwise combined with other materials: — Without fittings
N309344 · 2020-02-25 — The tariff classification of a rubber bellows from Korea
Inc. The subject product is called a bellows assembly, identified by Part Number AAS73229401. A representative sample was provided. The bellows assembly is composed of vulcanized ethylene propylene diene monomer (EDPM) rubber which is molded into a pipe with a bellows configuration. The bellows is imported without fittings. The bellows is attached inside the washing machine between the tub and the drain hose assembly using metal clamps. The bellows serves as an auxiliary passage for the water to be removed from the washing machine tub to the drain hose assembly. The applicable subheading for…
N260033 · 2014-12-24 — The tariff classification and status under the North American Free Trade Agreement (NAFTA) of rubber tubes from Mexico; Article 509
The imported product (Item number 42146319) is a pre-cut tube composed of natural latex rubber. You describe the tube as a hose, but since it is not reinforced, it is more accurately described as a tube. This tube does not have any fittings. The tubes are manufactured in the United States by an unrelated manufacturer/supplier to Watts. You state that this manufacturer has certified that the tubes are of U.S. origin and qualified for NAFTA. The rubber tubes are purchased in 50-foot lengths and then shipped by Watts to Mexico. In Mexico, the tubes are cut into 10-foot pieces, coiled and…
N197170 · 2012-01-13 — The tariff classification of rubber breather hoses from Japan
, you requested a tariff classification ruling. Three photographs were submitted with your letter, which represent three styles of transmission breather hoses. Parts 99073AA072, 99073AA081 and 99073AA100 are black hoses made of nitrile-butadiene rubber (NBR). The purpose of the breather hose is to ensure that the automatic transmission fluid is not released into the environment as the fluid expands from the heat of use. One end of the breather hose connects to a metal nipple that attaches to an automobile transmission. The other end of the hose is vented to the air. A plastic wire loom holds…
K82215 · 2004-01-09 — The tariff classification of insulation sheets and tubes from Thailand or Indonesia.
, you requested a tariff classification ruling. Two samples were submitted with your request. The articles are identified as closed cell insulation products used in heating, air conditioning and refrigeration applications where heat loss and condensation control are required. The products are made of cellular vulcanized synthetic rubber consisting essentially of ethylene propylene diene monomer (EPDM) and butyl rubber. The insulation material will be imported in the form of tubes and sheets with thicknesses up to two inches. The applicable subheading for the Aerocel sheets will be…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product