Solid or cushion tires
Part of: 401290 — Other:
N356987 · 2025-12-29 — The tariff classification of a pallet jack and wheel from China
The first item under consideration, model number HPT25, is a manual pallet jack used to lift and move palletized loads. It has a handle, a hydraulic pump system, and forks, which are metal arms that slide underneath a pallet or skid. The handle functions both as a pump handle and as a steering mechanism. The operator pumps the handle to raise the load and then pushes the pallet jack to its destination. This model has a 2,500-kilogram lifting capacity, a 27-inch overall width, and forks that are 48 inches in length. The second item under consideration is identified as a solid rubber wheel used…
N354436 · 2025-10-17 — The tariff classification of solid tires from China
The item under consideration are solid tires, part number 280-1346, stated as being made of Ethylene Propylene Diene Monomer rubber (EPDM), which is a synthetic form of rubber. These solid tires are designed for use with the “MartCart,” an electric shopping cart. You state that these tires were designed with specific size, tread, load, and rolling resistance to meet specific performance and safety requirements for use in indoor retail environments, and that they are not marketed for, nor suitable for, bicycles, scooters, or passenger vehicles. The applicable subheading for the solid tires,…
N317439 · 2021-03-03 — The tariff classification of a cured-on tire and press-on tire from Sri Lanka
The first item under consideration is a cured-on tire, part number 38.1306.1391, designed for a scissor lift aerial work platform truck. The tire is composed of a casted steel wheel or hub with vulcanized rubber cured to the wheel. Once cured the rubber and wheel cannot be separated. The tire also features a grey non-marking compound for indoor applications. The second item under consideration is a press-on tire, also referred to as a cushion tire, part number 12.173.18628. The tire is solid and made of a rubber tread layer bonded to a cylindrical steel band. The tire is designed to be used…
N280251 · 2016-10-24 — The tariff classification of solid tires from China and Taiwan
The item under consideration has been identified as a new tire, manufactured from solid rubber, designated as “Not-For-Highway Service” (NHS) that will be imported as a continuous band of vulcanized rubber. You state that, after importation, the tire will be affixed to a rigid metal rim using a gluing process. You go on to explain that this is fundamentally different from the way that pneumatic tires are affixed to rims. Instead of adhesive, air pressure is relied upon to keep the tire on the rim. You provided a photograph of the item as imported and state that the material content of the…
N100717 · 2010-04-28 — The tariff classification of a cushion tire.
A description and photos of the production process were included with your request. The article in question is a cushion tire which is completely filled with layers of rubber. Pneumatic tires are imported into Canada where workers spread the empty tire and install numerous circular layers of rubber around the inner circumference of the pneumatic tire. The final layer fits to the bead of the tire and air is not necessary for the tire to maintain its shape. This cushion tire is then imported into the US. The applicable subheading for the cushion tire will be 4012.90.1000, Harmonized Tariff…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product