Coniferous: — Of pine (Pinus spp.)
N348722 · 2025-05-21 — The tariff classification of wood boards from Brazil
Product information was submitted for our review. The items under consideration are rough-sawn boards that are dog-eared at one end. The top two corners of each board are cut at a 45-degree angle. The boards are constructed of taeda pine (Pinus taeda) or Elliotis pine (Pinus elliotii). The boards measure approximately 5.5” wide by 0.6” thick by four feet, six feet, or eight feet in length. You indicate that the boards are not treated with any preservatives, and are not finger-jointed or otherwise worked. You also state that the boards are not planed, sanded, finished, or otherwise worked.…
N348178 · 2025-05-08 — The tariff classification of wood fence components from Brazil
Product information was submitted for our review. The items under consideration are dog-eared fence pickets measuring 7 feet in length. The top two corners of each board are cut at a 45-degree angle. The boards are constructed of taeda pine (Pinus taeda), a coniferous wood. You indicate that the wood will be rough cut but provide no information about coatings or preservatives. Therefore, we will consider the wood to be untreated. You also do not indicate that the boards are finger-jointed for increased length. Six-foot-long, dog-eared pickets are standard pickets within the U.S. fence…
N346536 · 2025-03-26 — The tariff classification of live edge wood boards from Canada
, Inc. The request was returned for additional information, which was received by this office on March 6, 2025. The ruling was requested on live edge wood boards and rectangular-cut wood boards. Product information and photos were submitted for our review. The items under consideration are pine wood boards that are marketed to be used for furniture and shelving. Photos provided indicate that the boards are imported in two styles: straight-sawn with at least one live bark edge, and rectangular-sawn (“square edge”). Each is sawn lengthwise along the grain of the wood. The boards are 2 inches…
N331045 · 2023-03-02 — The tariff classification of lodgepole pine poles and half-poles from Canada
, Inc. The ruling was requested on lodgepole pine poles and half-poles. Product information and photos were submitted for our review. In your letter, you describe the items as “lodgepole pine fence rails”. However, the items are not dedicated by their manufacturing (e.g., drilled, shaped, worked with joinery, etc.) for any specific purpose, so we will refer to them herein as “poles” and “half-poles”. The lodgepole pine poles are 3.5”-diameter, 16’-long, wood poles that are turned to a uniform diameter. They are treated with chromated copper arsenate as a preservative. As you note, the…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product