Other
N343597 · 2024-11-26 — The tariff classification engineered wood veneer sheets with fleece backing from China
The ruling was requested on engineered wood veneer sheets with fleece backing. Product information and pictures were submitted for our review. You indicate in the ruling request that samples would be forwarded with the ruling request, however, we did not receive the samples. The products under consideration are engineered veneer sheets (also known as reconstituted veneer sheets) with fleece backing. Unlike natural wood veneer sheets, which are peeled from natural wood logs, engineered veneer sheets are sliced from laminated wood blocks. You indicate the engineered veneer sheets consist of…
N320041 · 2021-07-02 — The tariff classification of bamboo core boards, bamboo veneers, and cork sheet from China
The ruling was requested on bamboo core panels, bamboo veneers, and cork sheet from China. Product information and photographs were submitted for our review. The first product under consideration is bamboo core panels imported in a multitude of sizes. The rectangular core panels measure approximately 102cm to 132cm long by 26cm to 27cm wide by 7mm to 9.6mm in thickness. The panels are constructed of a single layer of rectangular bamboo strips bonded together side-by-side to form an expanse . Each panel is straight-cut along its edges and ends. After importation, the panels are combined with…
N243750 · 2013-07-31 — The tariff classification of high performance wood veneers from France
Samples were previously submitted for our review and have been retained for reference. The ruling was requested on several high performance veneers, namely Brown Aningre, Amber Bamboo, Tropical Zebra Wood, Bog Oak, and Bubinga. Each of the products is constructed of a veneer of the respective wood type. The veneer is backed with three layers of phenolic resin-impregnated kraft paper, and is coated on its face with melamine. The documentation previously provided explains that these products function as veneers but have the durability of high pressure laminates. The Explanatory Notes to the…
H194699 · 2012-04-20 — Classification of bamboo strand sheet
, for a binding ruling on the tariff classification of bamboo strand sheet under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The merchandise at issue is identified as “Strand Veneer” items BP23698PD-NAUF, BP-24898PD-NAUF, BP-1872PD, BP-1872PH and BP-1872NEO. It is made from shredded bamboo strips, measuring ¼” x ¾” x 72”, that are dipped into an adhesive resin and compressed into a solid block. The compressed block is then sliced into sheets, in thicknesses of 2.5 mm or 4 mm. These compressed bamboo sheets are marketed as veneer to be cut for edge banding purposes to…
N061234 · 2009-06-02 — The tariff classification of a veneer sheet reinforced with a plastic sheet of phenolic resin ("Dec Teck laminate") from France
The product in question consists of a veneer sheet reinforced with a sheet of phenolic resin and referred to as “Dec Teck laminate.” A sample was submitted. According to the sample, the thickness of the subject product is approximately 1 mm. The wood veneer appears to be approximately 0.75 mm thick. You have stated that the wood veneer layer has been spliced and/or end-jointed. You indicated that various wood species will be used but have not identified any of wood species. In the condition as imported, the subject product will be in sheets measuring 4 feet x 8 feet or 4 feet x 10 feet. The…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product