Wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed
Part of: 440910 — Coniferous:
N344537 · 2024-12-18 — The tariff classification of door flat jambs from Brazil
The request addressed pine flat jambs. Product information and a sample were submitted for our review. The product under consideration is door flat jambs. You indicate that the jambs are constructed of solid pine (a coniferous wood) wood. The jambs are generally rectangular and measure approximately 11/16” in thickness, 4 5/8” in width, and 81” in length. The wood is end-jointed – specifically, finger-jointed – several times throughout its length. There are six contoured, squared grooves that run continuously along the back of the jamb. There is a protrusion on each edge that also runs…
N321173 · 2021-09-02 — The tariff classification of wood fruit drying crate components from Mexico
The ruling was requested on wood fruit drying crate components. Product information and photos were provided for our review. The product under consideration is wood rails identified on manufacturing documents by the numbers GC-002 and GC-003. Both part numbers appear to be identical. Each is a shaped, solid, Ponderosa pine wood rail used in the manufacturing of fruit drying crates. The fruit drying crates are identified as “crates” in your submission but appear to be platforms constructed with very short, or no, side walls. The rails measure approximately 1 1/8” wide by 1 5/16” thick by 36”…
N281484 · 2016-12-29 — The tariff classification of wooden door components from Canada
The ruling was requested on wooden door components. Product information and samples were submitted for our review and will be retained for reference. The ruling covers several different products and variations on those products. Please note for future reference that, in accordance with Title 19, Code of Federal Regulations, Part 177.2 (b)(2)(ii), ruling requests are limited to five items of the same class or kind. According to your submission, the various components are manufactured in Canada from aspen and eastern white pine woods. The products to be imported fall into the following…
N281534 · 2016-12-29 — The tariff classification of unassembled flat frames for box springs from Canada
The request was returned to you for additional information, which was received by this office on December 1, 2016. The ruling was requested on unassembled flat frames for mattress box springs. Product information and samples were submitted for our review and will be retained for reference. When assembled, the flat frame forms a single platform, or part, of a mattress box spring. The box spring will be assembled from multiple wooden platforms, wooden supports, and a metal spring grid. The unassembled flat frame consists of five wooden components that will be imported cut to shape. The…
N239508 · 2013-04-02 — The tariff classification of solid wood panels from Argentina
The ruling was requested on two solid wood panels. Two representative samples were submitted for our review. The first submitted sample is a solid, rectangular wood panel measuring approximately 2 ½” (w) x ¾” thick. You state that the panels will be imported in random lengths of 11 1/8” to 47 1/8”. The panel is composed of Taeda pine and is continuously shaped on its edges, ends, and face. It has a 4mm deep, 13mm wide groove cut along the length of its face. One edge of the panel is shaped with a continuous groove, the corners along the face are nosed, and the ends are rabbeted and beveled.…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product