Other: — Tongued, grooved or rabbetted continuously along any of its edges and dedicated for use in the construction of walls, ceilings or other parts of buildings: — Laminated boards bonded in whole or in part, or impregnated, with synthetic resins
Part of: 441113 — Medium density fiberboard (MDF): — Of a thickness exceeding 5 mm but not exceeding 9 mm:
N238576 · 2013-03-22 — The tariff classification of laminate fiberboard flooring planks from Germany and China
The ruling was requested on two fiberboard “laminate flooring” planks. Representative samples were submitted for our review and will be retained for reference. Both flooring panels measure approximately 195mm wide; the German panel measures 6mm in thickness, and the Chinese panel 11.5mm. You do not indicate the lengths in which either panel will be imported. Both panels are composed of wood fiberboard that has been laminated with melamine impregnated paper layers on both surfaces. The top surface includes a decorative wood grain printed paper and is finished with aluminum oxide. The…
N191576 · 2011-11-17 — The tariff classification of laminate (fiberboard) flooring panels from China
The ruling was returned to you for additional information, which was resubmitted to this office on October 31, 2011. The ruling was requested on two types of laminate (fiberboard) flooring panels. Two representative samples identified as “high glossy” and “small embossed” were submitted for our review. The panels consist of a wood fiberboard laminated on both surfaces with paper layers. The top or face surface consists of a paper layer which has a decorative design printed on it and has been impregnated with melamine. The bottom or back surface is covered with a balancing paper impregnated…
N087662 · 2010-01-07 — The tariff classification of laminate flooring from Germany
The ruling was requested on laminate flooring. Four representative samples were submitted, which you have identified as #1, #2, #3, and #4. Based on your description, the product is manufactured using the Direct Pressure Laminate (“DPL”) process. It consists of wood fiberboard laminated on both surfaces with paper layers. The top or face surface consists of two layers: (1) a paper layer which has a decorative design printed on it and has been impregnated with melamine; (2) a wear layer of melamine impregnated paper that is coated with Aluminum Oxide. The bottom or back surface is covered with…
N069264 · 2009-08-16 — The tariff classification of high density fiberboard (laminate) flooring from China
The ruling was returned to you for additional information which was resubmitted to this office on June 21, 2009. The ruling was requested for three types of laminate flooring identified as follows: “Radiant Luster,” “Accapella Jatoba,” and “Cape Verde.” A sample of the “Cape Verde” was submitted together with product specifications for each flooring type. In your letter, you state that the three flooring types have similar characteristics with the exception of the thickness of the fiberboard core and the finished thickness of the completed product. The laminate flooring in question is…
N067580 · 2009-07-29 — The tariff classification of fiberboard flooring from China
Reichwein, dba – DPR, Inc. The product in question is referred to as “Baby Grand Laminated Flooring – White Oak (Item # 029).” It is made of High Density Fiberboard (“HDF”) that has been laminated on both sides with a 0.15 mm thick resin impregnated paper. The face or wear layer of the flooring panel has a decorative paper printed to look like white oak. The back of the panel has a 90 gr. solid color (resin impregnated) balancing paper. The subject flooring panels measure 140 mm wide x 1210 mm long x 8.3 mm thick (the HDF itself is 8 mm thick). The panels are tongued and grooved (“T&G”) along…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product