Other: — Other: — Other
Part of: 441192 — Other: — Of a density exceeding 0.8 g/cm3 :
N305472 · 2019-08-23 — The tariff classification of magnesium fiberboard flooring from China
The request was returned to you for additional information, which was received by this office on June 14, 2019. The request was returned to you a second time for additional information, which was received by this office on July 26, 2019. The ruling was requested on magnesium fiberboard flooring panels. A sample and product information were submitted for our review and will be retained for reference. The product is identified as “PMgO” flooring. The flooring panel sample measures approximately 7.5”(W) x 47” (L) x 10mm thick. The board is constructed a fiberboard core that consists of…
N278729 · 2016-09-28 — The tariff classification of hardboard door skins from Ireland, Chile, or Canada
The ruling was requested on hardboard door skins. Samples, photos, and product information were submitted for our review and will be retained for reference. In your letter, you describe manufacturing of hardboard, which is fiberboard manufactured by the wet production process. The hardboard is then pressed to shape to the appearance of a multi-panel, rail-and-stile-type wood door. The skins measure between 2.8 and 3.2mm in thickness, and have a density of approximately 0.9 g/m². The door skins are primed, and may be embossed to give the appearance of wood grain. The finished door skins are…
N238775 · 2013-03-25 — The tariff classification of OctoPerf panels and sample swatches
The ruling was requested for six products, OctoPerf panels and swatch samples in three constructions. Three samples were submitted for our review and will be retained for reference. The three samples submitted are representative of both the panels and swatches for each construction; the 4 ½” by 3 ½” swatches are merely cut from the larger panels. You state that the samples provided are actual swatches that are used exclusively for soliciting sales in the United States. The first sample (A) is a sheet constructed of high density fiberboard (HDF) that has been faced on either side with beech…
N235680 · 2012-12-20 — The tariff classification of fiberboard ceiling and wall planks from China
The ruling was returned to you for additional information which was resubmitted to this office on November 21, 2012. The ruling was requested on ceiling and wall planks which are identified as “Toptile Woodgrain Ceiling and Wall Planks”. A representative sample and product literature was submitted for our examination. The panels consist of a wood fiberboard laminated on both surfaces with paper layers. The top or face surface consists of a paper layer which has a decorative design printed on it. The bottom or back surface is covered with a balancing paper. The panels are tongued and grooved…
N160575 · 2011-05-12 — The tariff classification of Foamkore products
The ruling was requested for multiple Foamkore products, described herein. Each Foamkore product noted in the request consists of a balanced construction panel with a 14mm- to 22mm-thick polystyrene foam core sandwiched between two layers of rigid face material: 2mm-thick medium density fiberboard (MDF), 3mm hardboard, 1/8” Red Lauan plywood, 1/4" birch plywood, 1/8” poplar plywood, and 3mm magnesium oxide. The marketing materials provided indicate that the Foamkore products will be imported in nominal 4’ x 8’ panels in thicknesses ranging from 3/4" to 3”. Your website describes the Foamkore…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product