Corks, stoppers, disks, wafers and washers: — Other
Part of: 450410 — Blocks, plates, sheets and strip; tiles of any shape; solid cylinders, including disks:
N347566 · 2025-04-15 — The tariff classification of cork stoppers from Portugal
Product information was submitted for our review. The product under consideration is cork bottle stoppers from Portugal. You note that the stoppers may be made of natural or agglomerated cork. The stoppers are cylindrical, and diameter of the stoppers is tapered The largest diameter does not exceed 19mm. You indicate that the stoppers are used primarily for the closure of wine bottles. The thickness (or length) of wine stoppers exceeds the maximum diameter. The applicable subheading for the natural cork stoppers will be 4503.10.2000, Harmonized Tariff Schedule of the United States (HTSUS),…
N302753 · 2019-03-26 — The tariff classification of bottle stopper from Portugal
A sample was submitted for our review and will be retained for reference. The product under consideration is a bottle stopper constructed of wood and cork. The cylindrical cork component, which measures approximately 3/4” long by 7/8” in diameter, is constructed of agglomerated, ground cork. The cork functions to seal a bottle. The cork is attached to a wooden disk measuring 1 1/4” in diameter and 1/2” in thickness. The wooden disk functions as a grip with which to remove the stopper from a bottle opening. Tariff classification under the Harmonized Tariff Schedule of the United States (HTSUS)…
N254853 · 2014-07-24 — The tariff classification of an electrical cable with connectors, stainless steel hose clamps, a cork foot and silicone tubing from various countries
A sample of each subject item, a diagram that shows each item and its location within the finished coffee maker, and a bill of materials list were submitted with your ruling request. The samples will be returned as you requested. The items under consideration are described as imported components that will be used in coffee makers which will be assembled in your factory in Portland, Oregon. The subject items are identified as a cord, hose clamps, a foot and tubing. You indicated that the country of origin for the cord, hose clamps and tubing will be Taiwan, and the country of origin for the…
N254852 · 2014-07-21 — The tariff classification of coffee maker parts from Taiwan, Portugal and China
The merchandise under consideration is five (5) components/parts for the Ratio Eight Coffee Machine. It is stated that these parts with other parts (60 parts total) will be used in the manufacturing of the coffee makers that will be assembled at the Ratio’s facility. The Ratio Eight Coffee Machine is an automated electric coffee maker. SKU number 119, is a light pipe made of Polycarbonate. The item is a visual indicator showing where the machine is in the brewing phase. SKU number 120, is a pressure fitting made of Nylon 66 copolymer. The item acts as an air conduit from the water tank. SKU…
N014568 · 2007-08-16 — The tariff classification of cork wine stoppers with decorative tops from Italy
The ruling was requested on cork wine stoppers with decorated caps. Photographs and a description of the stoppers were submitted. The stoppers consist of tapered agglomerated cork attached to an enamel glazed clay mushroom shaped top. After the tops are fired and glazed they are decorated with various designs. The cork stoppers are 29 mm long and taper in thickness from 44 mm to 21 mm. The essential character of the subject wine stoppers, composed of cork and clay, is imparted by the cork because of the role the cork plays in the functioning of this article as a wine bottle stopper. The…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product