Textile flock and dust and mill neps
N354260 · 2025-10-22 — The tariff classification of dry milled aramid fibers from France
Photographs were submitted in lieu of a sample. This subject merchandise, “Aramid short fiber AR-7351” is a type of short-cut, chopped, synthetic polyamide fiber intended to be used in an industrial setting as a reinforcement material in components such as brake pads, gaskets and sealing, thermal and acoustical damping products. The dry milled aramid fiber is made of 99 percent para-aramid (para-phenylene-terephthalamide) fiber and may contain .5 percent nylon/polyester and .5 percent phenolic resin particles. You state that the aramid staple fibers are not combed or carded when manufactured…
N278819 · 2016-09-28 — The tariff classification of chopped fibers from Japan
You submitted descriptive literature on 5 samples of synthetic treated chopped textile fibers. The chopped textile fibers have been cut to sizes between 3 and 3.5 mm lengths. All of the chopped fibers are coated in an adhesive compound of Resorcinol, Formalin and Latex (RFL) this product is not considered rubberized within the meaning of Note 4(a) to Chapter 40, of the Harmonized Tariff Schedules of the United States (HTSUS). RFL is used to enhance the fibers ability to adhere to the rubber. Sample one is 6529 Chopped Conex 3mm, this is described as a treated chopped meta-aramid fiber…
N275553 · 2016-06-01 — The tariff classification of chopped Zylon™ fibers from Japan
You submitted a sample of chopped Zylon™ 3.0 AS. This merchandise is a synthetic polymer material. Specifically Zylon™ is a treated chopped poly (para-phenylene benzobisoxazole) synthetic textile fiber. The fibers are coated in an adhesive composed of Resorcinol, Formalin, Latex (RFL). This enhances the fibers ability to adhere to the rubber. The fibers are cut to a length of 3 mm and have a decitex of 3300. The chopped Zylon™ fibers will be used in the manufacturing of automotive and industrial rubber belting. The applicable subheading for the chopped Zylon™ 3.0 AS will be 5601.30.0000,…
N250088 · 2014-02-25 — The tariff classification of chopped fibers from Japan
You submitted three samples of 100% polyester cut (chopped) fibers, all 5 mm in length. The applicable subheading for the three samples of chopped polyester fibers will be 5601.30.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for textile, flock. The general rate of duty will be Free. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. The samples will be returned. This ruling is being issued under the provisions…
N243396 · 2013-06-28 — The tariff classification of flocked heat transfers from Japan
You submitted two samples of heat transfers, item #LG1008. They consist of rayon flocking on carrier paper, with an adhesive in the design of a logo. The logo design will be heat-transferred to finished garments. The heat transfers measure 26mm x 26mm. The logo is produced by creating the image on a film or screen, then printing the image onto flocked sheeting. Then the adhesive is applied on the back of the sheet. We assume that in the heat transferring, both the paper and the adhesive are consumed, leaving only the textile flocked logo. The applicable subheading for flocked heat transfers…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product