Laminated fabrics (223)
Part of: 560314 — Of man-made filaments: — Weighing more than 150 g/m2:
N340992 · 2024-07-26 — The tariff classification of a nonwoven laminated roofing underlayment from India
A sample was submitted and will be retained for training purposes. In your letter and subsequent correspondence, you requested a classification ruling on your fabric designated as GAF Tiger Paw. The fabric is described as a laminated roofing underlayment designed to protect residential and light construction roofing systems by preventing water intrusion. The fabric is composed of: A top layer of spunbond non-woven fabric of filament polypropylene fibers weighing approximately 90 g/m2. It is light grey in color with a diamond embossed pattern. A first lamination layer primarily of low-density…
N317508 · 2021-03-08 — The tariff classification and country of origin of a laminated nonwoven fabric from Germany; 19 CFR 102.21(c)(4)
On February 10, 2021 your request was opened, and a control number was provided to your office. This office will retain the samples accompanied by your letter. FACTS: The subject merchandise is referred to as “HydroGap® drainable housewrap” (henceforth referred to as “HydroGap”). The material subject to this request is sold in 9’x100’ and 10’x100’ rolls. The material is said to contain two main components: (1) a 100 g/m2 “trilaminate” consisting of a water-resistant polypropylene film sandwiched between two layers of nonwoven fabrics composed wholly of polypropylene filaments and (2) plastic…
N261854 · 2015-03-18 — Classification and country of origin determination for a self-adhesive nonwoven membrane of three layer construction, from Austria; 19 CFR 102.21(c)(2)
Samples were provided. FACTS: Sopraseal StickVP is an embossed laminated textile product with two fibrous surfaces, which has been coated with an adhesive and a protective film. According to the sample and the information provided, this product is a three-layer membrane which has been manufactured by sandwiching a layer of polypropylene film between two layers of polypropylene nonwoven textile, bonding them together by a process of thermo-calendaring. The laminated fabric weighs 150 g/m2. The base fabric is formed and laminated in Austria, and then sent to France for coating with a glue and…
N236831 · 2013-01-23 — The tariff classification of four products for use in shower stall installations, from China.
You submitted four representative samples as follows: 1) shower waterproofing liner material, 2) inside/outside corner pieces, 3) pipe seals and 4) shower valve seals. All of these materials, according to your letter, are composed of a center layer of polyethylene plastic that is sandwiched between two spunbonded nonwoven fabrics of polypropylene man-made fiber construction. These materials differ mainly in configuration as described below: The shower liner material, based upon the sample and your literature, appears to be a material that will be imported in a square or rectangular…
N130456 · 2010-11-05 — The tariff classification of a two-ply nonwoven fabric, for use as roofing underlayment, from China.
Your sample is being retained for our files. The instant sample was not identified as to style or quality number. Your letter states it consists of a two ply spunbonded nonwoven fabric which is composed of 100 percent polypropylene man-made fibers (filament). In addition, these two layers have been bonded together via an extrusion coating process. The finished product is stated to weigh 190 grams per square meter and will be imported as roll goods. The applicable subheading for the product will be 5603.14.3000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product