Sheets: — Not napped (666)
Part of: 63022210 — Containing any embroidery, lace, braid, edging, trimming, piping or applique work
i80426 · 2002-04-25 — The tariff classification of sheet set from Bangladesh.
You submitted a sample of a sheet set comprised of a flat sheet, fitted sheet and pillowcase. The sheets and pillowcase will be made from either a woven blend of 55 percent cotton and 45 percent polyester or 55 percent polyester and 45 percent cotton fabric. The fabric is printed with a butterfly and daisy pattern. The pillowcase is folded and sewn along two edges with a slit opening along the fourth. The edge along the open end is finished with a ruffle. The flat sheet is hemmed on three sides. The top edge of the flat sheet is finished with a ruffle. The fitted sheet is fully elasticized.…
f86161 · 2000-04-25 — The tariff classification of sheet sets from Pakistan.
You submitted samples of two sheet sets. Both sets consist of one pillow sham, a flat sheet and a fitted sheet. All of the items are stated to be made from 50 percent cotton and 50 percent polyester woven fabrics. The first set is made from a fabric printed with a geometric design while the second set is printed with a floral design. There is a three inch ruffle sewn around the edges of both shams. The pillow shams measure approximately 20 x 30 inches exclusive of the ruffle. The backs have an overlapping flap type closure which is used to accommodate the insertion of a pillow. Although you…
f84299 · 2000-03-28 — The tariff classification of a sheet set from Pakistan.
The submitted set consists of one pillow sham, a flat sheet and fitted sheet. All of the items are stated to be made from 50 percent cotton and 50 percent polyester woven fabric. The fabric is printed with a floral design. There is a four inch ruffle sewn around the edges of the sham. The pillow sham measures approximately 20 x 30 inches, exclusive of the ruffle. The back has an overlapping flap type closure which is used to accommodate the insertion of a pillow. The flat sheet has a 4.5 inch ruffle sewn along three sides. It measures approximately 66 x 96 exclusive of the ruffle. The fitted…
c86880 · 1998-05-28 — The tariff classification of a flat sheet and fitted sheet from Indonesia.
The instant samples are a flat sheet and fitted sheet. Both sheets are made from 48 percent cotton and 52 percent polyester woven fabric. The fabric is printed with a small leaf pattern The edges on the length side of the flat sheet are selvedge. The bottom edge is hemmed and a seven inch wide strip of contrasting fabric has been sewn to the top edge. A strip of piping has been inserted into the seam between the extension and the edge of the sheet. The fitted sheet has a piece of elastic sewn along the edges. The sheets are imported separately. The applicable subheading for the flat sheet…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product