On a base of woven textile fabric only
N073100 · 2010-01-15 — The tariff classification of abrasive articles from China
” A sample of each article was submitted with your ruling request. These samples were sent to our Customs and Border Protection Laboratory for analysis. Our laboratory has now completed its analysis. Our laboratory determined the following facts about the “dual sided callus file and foot buffer.” One side of this product consists of abrasive powder agglomerated into the body of a metal base. The other side of the product consists of abrasive powder on a strip of paper which is glued to the article. Our laboratory determined the following facts about the “4-way buffer.” This article is a…
c81068 · 1997-11-07 — The tariff classification of abrasive sandcloth rolls from Taiwan
, you requested a tariff classification ruling regarding an abrasive article. A representative sample of the article was submitted with your ruling request. You indicated in your letter that the sandcloth rolls are composed of natural aluminum oxide grain or grit that is placed on a base of woven textile material. The grain or grit is held to the textile base by means of a resin glue. You further indicated that the article is designed for buffing and polishing "pre-solder and after solder" copper tubing. The applicable subheading for the abrasive sandcloth rolls will be 6805.10.0000,…
807449 · 1995-03-13 — The tariff classification of a sanding drum set from Taiwan.
The sample that you submitted with your ruling request, Blair Product #527101, consists of five rubber and steel arbors (sizes one half inch, three fourths of an inch, one inch, one and one half inches, and two inches) and 20 sanding sleeves of various sizes. You stated in a telephone conversation that each sanding sleeve is composed of a cotton woven textile backing material upon which sand is glued. These sleeves are inserted over the arbor which is attached to a power tool. The sample will be returned as you requested. The applicable subheading for the sanding drum set will be…
955575 · 1993-12-22 — 955223 modified; Super Quick Disc
This is in regards to Headquarters Ruling Letter (HRL) 955223 dated December 8, 1993, issued to you on behalf of Noritake Co., Inc., regarding the tariff classification of Noritake Skyhawk Super Quick Disc under the Harmonized Tariff Schedule of the United States (HTSUS). A typographical error appears in the holding to HRL 955223, wherein reference is made to a non-existing HTSUS subheading. The HOLDING reads as follows: The Super Quick Disc is classified under subheading 6805.10.30, HTSUS, as natural or artificial abrasive powder or grain, on a base of woven textile fabric only, which is…
955223 · 1993-12-08 — Super Quick Disc; 6804.22.10; EN 68.04; EN 68.05; HRL 951607
, Inc, requesting the tariff classification of Noritake Skyhawk Super Quick Disc under the Harmonized Tariff Schedule of the United States (HTSUS). A sample was submitted for examination. FACTS: The Super Quick Disc ("disc") is an abrasive product made of aluminum oxide (corundum) grit coated on woven textile strips that are arranged spherically around an aluminum hub. The abrasive is "sandpaper" or a sanding belt cut into small strips. Epoxy glue is used to bond the abrasive strips to the aluminum hub. The disc is designed to fit hand-held angle grinders without any adaptor. Depending on…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product