Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enameled or otherwise worked, but not framed or fitted with other materials:
Part of: 70 — Glass and glassware
H237648 · 2015-02-19 — Request for Internal Advice; tariff classification of synthetic quartz glass substrates coated with a thin layer of chrome metal
This is in reference to your request for Internal Advice, initiated by counsel for Hoya Corporation USA (“Hoya USA”) via letter, dated September 11, 2012. At issue is the proper tariff classification of synthetic quartz glass substrates coated with a thin layer of chrome metal under the Harmonized Tariff Schedule of the United States (HTSUS). The request for Internal Advice is sought based on Hoya USA’s assertion that the glass substrates are classified in heading 7006, HTSUS, which provides for “Glass of heading 7003, 7004, or 7005, bent, edge-worked, engraved, drilled, enameled or otherwise…
965548 · 2002-08-07 — Internal Advice 02/006; glass substrates
The following is our decision regarding your memorandum (APP-6-TO:CT301 ML), to the Customs Information Exchange, dated March 4, 2002, forwarding Internal Advice 02/006, which seeks classification of glass substrates pursuant to the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: Based upon the information provided, the glass substrates at issue (IBM P/N 34L8245, GLASS, SUBSTRATES, RAW) are made from either float glass or pressed glass that have been either cut from a sheet of fused synthetic glass or pressed and sintered to a rough shape. The substrates are then further…
958837 · 1996-06-18 — Protest 2809-95-101638; mirrored glass decorative appliques;ENs 44.14, 70.06, 70.09; HRLs 088088, 086405
The following is our response to Protest 2809-95-101638 concerning your actions in classifying and assessing duty on mirrored glass decorative appliques, under the Harmonized Tariff Schedule of the United States (HTSUS). Samples were submitted for our review. FACTS: The subject articles consist of mirrored glass decorative appliques of various shapes. They are between 4 and 6" long and 2 and 4" wide. All are backed with a thin metallic coating. Some are additionally backed with wood, cut to shape. The mirrored glass portion is decorated over the entire surface and has low reflective…
957909 · 1995-05-19 — Fusion glass for electroluminescent flat panel displays; part; Additional U.S. Rule of Interpretation 1(c); 7004; drawn glass; Note 2, chapter 70; EN 70.04; EN 70.06; cutting to shape; absorbent or reflecting layer; edge working; other glass of heading 7004, bent, edgeworked, engraved, drilled, enameled or otherwise worked, but not framed or fitted with other materials
A sample was submitted for our examination. Additional information obtained via a telephone conversation with a member of my staff and contained in a letter dated March 27, 1995, was considered in rendering this decision. FACTS: The article at issue is various sized fusion glass designed and used for electroluminescent flat panel displays. The fusion glass is drawn glass which is cut to shape. You state that the edge work is performed to remove the sharp edges left from the cut which is done only to protect the handler of the glass from dangerous sharp edges. Each piece will be 1.1 mm in…
087015 · 1990-10-03 — Internal Advice Request 20/90- Classification of mirrored glass switchplates
Mr. John M. Peterson of the law firm of Neville, Peterson & Williams, on behalf of their client, American Tack and Hardware Co., has requested an internal advice on the proper classification of mirrored glass switchplates under the Harmonized Tariff Schedule of the United States Annotated (HTSUSA). Samples were submitted for our examination. FACTS: The mirrored glass switchplates measure approximately 4-1/2 inches in height and 2-3/4 inches in width. The switchplates have a thin chemical coating on the back. These plates are designed to be mounted on walls, to cover electric switches or…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product