72

Code

72

Type

heading / subheading

Tariff lines inside

559

Duty rates inside

Free (131), 1.9% (3), 5% (3), 1.4% (2), 1.5% (2), 4.2% (2)

Units of quantity

kg (517), t (21), kg, Si kg (6), kg, Mn kg (6), kg, Cr kg (5), kg, Ni kg (1)

Classification rulings (U.S. Customs, CROSS)

• N355186 · 2025-11-05 — The tariff classification of stainless steel unfinished die segments from Austria

  The products under consideration are M390 stainless steel, unfinished die segments. Made from flat-rolled steel sheets, the circular segments measure 160 mm in thickness, 195-215 mm in width, and 470-540 mm in length. The die segments will undergo final production in the U.S. for integration into pill punching machines. In your submission, you suggest that the unfinished stainless steel die segments are properly classifiable in subheading 8479.90.9596, Harmonized Tariff Schedule of United States (HTSUS), as parts of machines of pill presses of heading 8479. We disagree. Although the segments…

• N353262 · 2025-09-10 — The tariff classification, country of origin, marking, and eligibility for preferential tariff treatment under the Dominican Republic-Central America-United States Free Trade Agreement (DR-CAFTA)

  The products to be imported are ALUZINC nonalloy steel planks for use in fence construction. The planks are coated in Aluminum-Zinc (AZ) and a layer of Regular Modified Polyester (RMP) for corrosion resistance. Each plank measures 70 inches tall by 6.5 inches wide. In your request, you suggest that the steel planks are properly classified under subheading 7308.90.9590, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers,…

• N351850 · 2025-08-12 — The classification of nonalloy steel billets from China

  The products to be imported are nonalloy steel billets measuring 3 inches in width x 3 inches in thickness x 12 inches long and contain less than 0.25 percent by weight of carbon. After importation, the billets will be used as a raw material for making steel in foundries. In your request you suggest that the steel billets are classified in subheading 7204.49, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Ferrous waste and scrap; remelting scrap ingots of iron or steel: Other. We disagree. Waste and scrap is defined in Section XV, Note 8(a)(ii) as “Metal goods…

• N351301 · 2025-07-23 — The tariff classification of steel grit from China

  The products under consideration are nonalloy (carbon) steel and stainless steel grit used to manufacture Microtracers® that are designed to assure the quality of mixed formula animal, poultry, and fish feed. In an email to this office, you provided sieve analyses of the two products you purchase and indicated that both types of grit have particle sizes between 0.1 mm and 0.4 mm. Powders, which include steel powders, are defined in Section XV, Note 8(b) of the Harmonized Tariff Schedule of the United States (HTSUS) as “Products of which 90 percent or more by weight passes through a sieve…

• N350709 · 2025-07-08 — The country of origin of cold-rolled stainless steel sheet

  The product to be imported is a polished and coated Grade 430 stainless steel sheet. This cold-rolled, cut-to-length sheet measures 0.9 mm in thickness, 1219 mm in width, and 3048 mm in length. A polyvinyl chloride (PVC) coating is applied to protect the surface finish. The sheet is made to ASTM A240 and will be used in the production of end-use products such as appliances or outdoor grills. Flat-rolled products are defined in Chapter 72, Note 1(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75…

• 7201 — Pig iron and spiegeleisen in pigs, blocks or other primary forms:
• 7202 — Ferroalloys:
• 7203 — Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity…
• 7204 — Ferrous waste and scrap; remelting scrap ingots of iron or steel:
• 7205 — Granules and powders, of pig iron, spiegeleisen, iron or steel:
• 7206 — Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
• 7207 — Semifinished products of iron or nonalloy steel:
• 7208 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
• 7209 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
• 7210 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
• 7211 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
• 7212 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
• 7213 — Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
• 7214 — Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
• 7215 — Other bars and rods of iron or nonalloy steel:
• 7216 — Angles, shapes and sections of iron or nonalloy steel:
• 7217 — Wire of iron or nonalloy steel:
• 7218 — Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
• 7219 — Flat-rolled products of stainless steel, of a width of 600 mm or more:
• 7220 — Flat-rolled products of stainless steel, of a width of less than 600 mm:
• 72210000 — Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
• 7222 — Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
• 722300 — Wire of stainless steel:
• 7224 — Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
• 7225 — Flat-rolled products of other alloy steel, of a width of 600 mm or more:
• 7226 — Flat-rolled products of other alloy steel, of a width of less than 600 mm:
• 7227 — Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
• 7228 — Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
• 7229 — Wire of other alloy steel:

• 72 — ТН ВЭД ЕАЭС: Черные металлы
• 72 — EU CN/TARIC: Iron and steel

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.