Other: — Other: — Other
Part of: 73044900 — Other, of circular cross section, of stainless steel: — Other
H306406 · 2020-01-28 — Request for binding ruling on the classification of steel coupling stock
, for a binding ruling on the classification of steel coupling stock. FACTS: The product under consideration is described as hot-rolled seamless steel pipe, made to specification API (American Petroleum Institute) 5CT. It comes in grades L80 type 1, L80 type 13Cr, T95, P110, C110, or Q125. The outside diameter is 2.750 inches to 16.500 inches with a wall thickness of 0.400 inches to 2.5 inches. Its usage is defined as “mechanical tube” for accessory material and “coupling stock”. The ultimate purchasers of the instant merchandise in the U.S. then further process the coupling stock to…
J80537 · 2003-02-24 — The tariff classification of stainless steel and nickel tubing.
The products under consideration are stainless steel and nickel tubes. Type 304 and 316 stainless steel medium and high pressure seamless cold-drawn tubes range from 6.35 mm to 25.4 mm in diameter and from 6 meters to 8.2 meters in length. These tubes, designed to handle pressure up to 150,000 psi, are used in the high pressure fluid handling industry. Type 304 and 316 annealed stainless steel low pressure seamless tubes range from 1.59 mm to 12.70 mm in diameter and from 6 meters to 8.2 meters in length. These tubes, designed for pressure up to 15,000 psi, are used in the high pressure fluid…
g86941 · 2001-03-06 — The tariff classification of steel tubular products from Canada.
Drawings and diagrams of the products to be imported were submitted with your ruling request. The products to be imported are described as pipe spools for a water purifying system. A Bill of Materials is shown on each pipe spool assembly drawing that was submitted. These pipe spools are pipes with fittings attached or pipes with valves attached or pipes with a combination of fittings and valves attached. The pipes are Schedule 10 plain end pipes made of Type 316L stainless steel and they range from 3 inches to 24 inches in diameter. They are made to ASTM Spec A 312, the Standard Specification…
b84807 · 1997-05-23 — The tariff classification of steel pipe spools from Canada.
(PCL), you requested a tariff classification ruling. The products to be imported are described as pipe spools to be used as parts of a particular process water cooling system (PCW). The pipe spools/pipes range in size from 1 inch to 60 inches in diameter and are made of Types 304 and 316 stainless steel. These pipe spools/pipes may be imported with fittings attached, with valves attached or with a combination of valves and fittings attached. The pipe spools are made to various ASTM Specifications which include A 182, A 102, A 312, A 403 and A 105. ASTM Spec A 182 is the Standard Specification…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product