Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Part of: 73063010 — Having a wall thickness of less than 1.65 mm
966457 · 2003-09-25 — Protest No. 1703-03-100063; longitudinally welded steel tubes used for making shipping containers
This is our decision regarding Protest 1703-03-100063, filed on behalf of Greif Bros. Corporation (protestant) concerning the classification, under the Harmonized Tariff Schedule of the United States (HTSUS), of certain welded steel tubes. FACTS: The products at issue are longitudinally welded steel tubes. The tubes are made of non-alloy steel and have a diameter that ranges from 21.87 mm to 22.13 mm. The wall thickness of the tubes ranges from 0.84 mm to 1.13 mm. The tubes are imported in six different lengths. One of these six tubes is “tent-poled” at the end (reduced in diameter). The…
963820 · 2000-10-27 — NY F80733 Affirmed; Welded Nonalloy Steel Tubes
In letters, dated March 10 and May 4, 2000, on behalf of Chemsico, Division of United Industries, you request reconsideration of a ruling in which the Director of Customs National Commodity Specialist Division, New York, classified certain nonalloy steel tubes for use in making outdoor illumination devices as other pipes, tubes and hollow profiles, of iron or steel, in subheading 7306.30.10, Harmonized Tariff Schedule of the United States (HTSUS). We regret the delay in responding. FACTS: In NY F80733, dated January 5, 2000, the merchandise was described as welded circular grade 1010 or 1020…
f89875 · 2000-07-27 — The tariff classification of steel pipe from Vietnam.
The products to be imported are electric resistance welded (ERW) circular and square/rectangular black and galvanized nonalloy steel pipes. The pipes will range from ½ inch to 3 inches in outside diameter. Wall thicknesses were not provided. The applicable subheading for the welded circular black and galvanized nonalloy steel pipes measuring less than 1.65 mm in wall thickness will be 7306.30.10, Harmonized Tariff Schedule of the United States (HTS), which provides for other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel,…
f89376 · 2000-07-25 — The tariff classification of steel tubes from Korea.
The products to be imported are electric resistance welded (ERW) aluminum coated nonalloy steel muffler tubes and ERW stainless steel muffler tubes. The tubes are of circular cross section and will range from 1 ½ inch to 3 inches in outside diameter and have wall thicknesses ranging from 0.048 inch to 0.070 inch. These muffler tubes will be imported in lengths of either 7 ½ feet or 10 feet and, after importation, will be bent to various forms to meet the design of the cars. The applicable subheading for the aluminum coated nonalloy steel tubes measuring less than 1.65 mm in wall thickness…
f84936 · 2000-04-11 — The tariff classification of steel conduit tubing from China, Japan, Korea, Mexico and Venezuela.
Representative samples of the products to be imported were submitted with your request. You plan to import electrical metallic tubing (EMT), sometimes referred to as “thin-wall” conduit, and galvanized rigid conduit (GRC). The welded EMT will be imported in 10-foot lengths in nominal sizes ranging from ½ inch to 4 inches. Wall thicknesses will range from 0.042 inch to 0.065 inch. The EMT is galvanized on the exterior and sprayed with a special lubricating compound on the inside. The welded GRC is produced in standard lengths of 10 feet and is threaded on both ends, with a coupling attached to…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product