Other: — Other, cold-drawn or cold-rolled (cold- reduced): — Containing more than 0.5 percent but less than 24 percent by weight of nickel
Part of: 73064050 — Having a wall thickness of 1.65 mm or more
N357431 · 2026-01-26 — The tariff classification of stainless steel pipes from India
The products to be imported are welded stainless steel pipes with a circular cross section. According to your submission, all of the pipes in question are welded, cold-drawn, polished and have a wall thickness of 1.65 mm or more. Based on the mill test certificates provided, all pipes contain more than 0.5%, but less than 24% by weight of nickel. The applicable subheading for all of the pipes will be 7306.40.5040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed),…
N304953 · 2019-07-23 — The tariff classification of perforated tubes from China
The products to be imported are described as perforated tubes for use in the construction of motorcycle mufflers. Imported in 10 and 20 foot lengths, these cold-drawn welded tubes are made to either Grade 201 or 409 stainless steel. Based on the chemistry provided, the tubes made to Grade 201 stainless steel contain 3.50 – 5.50% nickel while the tubes made to Grade 409 contain a maximum nickel percentage of 0.5% and a chromium content of 10.75 – 11.75%. The tubes have outside diameters ranging from 1 inch (25.4 mm) to 3 inches (76.19 mm) and wall thicknesses ranging from 0.028 inch (.711 mm)…
N301324 · 2018-11-16 — The tariff classification of charge air cooler (CAC) tubes from Canada
The products under consideration are described as stainless steel pipes or tubes. Part number P4690CTB has an outside diameter of 2.5 inches, a wall thickness of 0.065 inches, and is 20.5 inches long. Part number P2350ETB has an outside diameter of 2.5 inches, a wall thickness of 0.059 inches, and is 36.5 inches long. Part number P11226BST has an outside diameter of 2 inches, a wall thickness of 0.065 inches, and is 19.5 inches long. Part number P11225ST has an outside diameter of 2 inches, a wall thickness of 0.083 inches, and is 6 inches long. Four representative samples of the tubes were…
N297414 · 2018-06-28 — The tariff classification of stainless steel pipes and fittings from China
Representative samples were included with your submission and will be returned under separate cover. The products to be imported are Type 304 stainless steel pipes and fittings used in compressed air and liquid systems. You indicate that the pipes and fittings are designed to be used together. The pipes, which have been cold-rolled from stainless steel sheet and then welded, have wall thicknesses ranging from 0.8 mm to 3.0 mm. Also, included are sealing rings which attach to the ends of the pipes and allow them to be press fit into the fittings which have expanded ends. The applicable…
a88263 · 1996-10-15 — The tariff classification of steel pipes and tubes from Thailand.
The products to be imported are galvanized carbon steel pipes/tubes and stainless steel pipes/tubes. The welded galvanized plain end pipes have outside diameters measuring less than 4 1/2 inches and are made to ASTM Spec A 53, the Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. The welded Type 304 stainless steel pipes are cold-rolled and measure 0.14 inch in wall thickness and from 2 to 3 inches in outside diameter. The applicable subheading for the welded galvanized pipes and tubes will be 7306.30.5032, Harmonized Tariff Schedule of the United…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product