Having a wall thickness of less than 4 mm: — Of iron or nonalloy steel
Part of: 730661 — Other, welded, of noncircular cross section: — Of square or rectangular cross section:
N360449 · 2026-04-28 — The tariff classification of welded tubes from Vietnam
The products to be imported are galvanized welded structural steel tubes of non-alloy steel, made to ASTM A500 Standard, and manufactured in Vietnam. According to your submission, these products may be imported either as galvanized steel tubing or pre-painted galvanized steel tubing. The rectangular tubes measure 2"x1" and 24 feet in length, and the square tubes measure 2.5"x 2.5"and are 8 feet in length. They have a wall thickness ranging from 0.76 mm to 0.95 mm. You indicate the tubes serve as structural framework of fences, onto which composite fence boards can be installed. The product is…
N356816 · 2026-01-07 — The tariff classification of steel automotive components from Canada
The products at issue are three steel automobile structural components, Part Numbers 89639.20.001.04, 89722.20.001.06, and 89718.20.001.08, which will be assembled into cross-car beams, which are also known as instrumental panel beams. Once assembled the completed structural assembly will be used to complete the dashboard, which is also where the steering wheel assembly will be mounted. 89639.20.001.04 is a rectangular component of 36 mm x 24.5 mm x 1078.1 mm (length), with a wall thickness of 2.4 mm. It is produced from cold-rolled steel coils and is neither painted nor coated. This…
N341638 · 2024-08-15 — The tariff classification of welded tubes from Spain, China, India, Thailand, Vietnam, or Turkey
S., Inc. The products to be imported are identified as structural square section beams. According to your submission, these welded, cold-formed, hot-dipped galvanized, nonalloy steel beams are used to transfer torsion, horizontal loads, and vertical loads from the tracker and solar panels to the pillars of the ground mounted steel structure. The beams measure 120 mm x 120 mm, 130 mm x 130 mm, or 150 mm x 150 mm and have a wall thickness ranging from 2 mm to 5.5 mm. You indicate that the beams will be both drilled and not drilled. The drilled beams contain eight holes on one end that are used…
N311240 · 2020-05-04 — The tariff classification of square tubes from Pakistan or Taiwan
The products to be imported are square nonalloy steel pipes/tubes to be used in the construction of a solar panel racking system. These cut-to-length, welded, galvanized steel tubes are used to provide vertical and horizontal support for the racking system and are available in four sizes: (1) 4” x 4” wide with a wall thickness of 2.5 mm; (2) 4” x 4” wide with a wall thickness of 3.05 mm; (3) 5” x 5” wide with a wall thickness of 2.5 mm and (4) 5” x 5” wide with a wall thickness of 3.05 mm. You state that the tubes will be combined with steel purlins and clamps to produce a complete solar…
N307926 · 2019-12-18 — The tariff classification, country of origin, and marking determination of square nonalloy steel tubes from Vietnam
The products to be imported are square/ rectangular welded steel tubes and are used in construction, staircase railings, steel grates, etc. The tubes will be imported in lengths of 20 feet in four different sizes: 5/8 inches X 5/8 inches (15.875 mm X 15.875 mm) with a wall thickness of 1.2 mm, 1 ¼ inches X 1 ¼ inches (31.75 mm X 31.75 mm) with a wall thickness of 1.4 mm, 1 ½ inches X 1 ½ inches (38.1 mm X 38.1 mm) with a wall thickness of 1.4 mm, and 1 inch X 2 inches (25.4 mm X 50.8 mm) with a wall thickness of 1.4 mm. The chemistry provided in the additional information shows the tubes are…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product