Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more
b88236 · 1997-07-30 — The tariff classification of steel wire grill from Israel.
, a tariff classification ruling. The pictures you have submitted show a metal grill. You state that the grill is made from cold rolled nonalloy steel wire which is cut to length and welded at the points of contact. You further state that the grill is not coated nor plated, the diameter of the wire is between 3 mm and 14 mm, and that the mesh size of the grill is 100 square centimeters or more. The provision applicable to the steel wire grill will be subheading 7314.20.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for Cloth, grill, netting and fencing, of iron or…
854575 · 1990-07-26 — The tariff classification of wire mesh fabric from Mexico.
You describe one item as welded fence panels. These are mesh fabric panels made of 1/4 inch (6.4 mm) or 4 guage (5.72 mm) galvanized round wire in five styles. The length of the panels is 16 feet, with widths of either 52 or 34 inches. The vertical wires in each panel are 8 inches (20.32 cm) apart, and the horizontal separation varies from 2 to 6 inches (5.08 cm to 15.24 cm), i.e. in all styles the mesh size is 100 cm2 or more. In all styles the wires are welded at the intersection, but they are not woven. None of the panels have frames. You described another item as welded utility fabric.…
850050 · 1990-03-12 — The tariff classification of wire fencing grills (roll-top fencing), fence posts, and gates from South Africa.
The fencing grill is formed by welding straight horizontal 4 mm wires to vertical 10 mm wires which have been bent to form a loop at the top. The loops are perpendicular to the plane of the grill and when the horizontal wires are attached, the loops add rigidity at the top of the grill. The grills are all under 8 feet in length and will be imported in heights ranging from 2 feet 11 inches to 3 feet 11 inches. After importation they will be attached to the imported fence posts with domestically sourced hardware. The fence posts measure 50 mm in diameter and their lengths will vary according to…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product