Other: — Other
Part of: 73151200 — Articulated link chain and parts thereof: — Other chain
N335708 · 2023-10-19 — The tariff classification and United States-Mexico-Canada Agreement (USMCA) eligibility of a roller and chain
The first product is referred to as a roller and is described as a component of a car wash conveying system. The roller is evenly spaced along the length of a chain that is connected to a sprocket within the car wash conveyor system. As the rollers move with the chain, they contact the front and rear wheels of a vehicle, helping it move along in a car wash tunnel. The second product to be imported is a log chain for use in a car wash conveyor system. The welded log chain is made of grade 80, heat treated alloy steel and has a 5/8" (15.87 mm) diameter. The third product to be imported is a 458…
N238688 · 2013-03-18 — The tariff classification of digging and trenching chains of unspecified origin.
Product literature and labeled schematic drawings were included with your submission. The items under consideration are described as digging and trenching chains. These chains are used on large outdoor trenching equipment to dig or plow trenches for irrigation, utility, electrical and communication lines and pipelines, etc. They are comprised of steel links, spacers, stations and cutting teeth. You indicate that the assembled chains vary in size (length, width, depth), pitch, tooth pattern and tooth material and are sold as both parts of the trenching machine on which they are installed and…
c80072 · 1997-10-21 — The tariff classification of collector chain and attachments from Japan
The items you plan to import are collector chain and attachments. Type SAV715 collector chain is constructed of alternating pin links and bushed links. A bush link is described as two bushings pressed into two bushed link plates. You state that there is no free turning roller on the bushing nor anywhere else on the chain. The chain has a pitch of 152.4 mm and contains an average 5 parts per pitch. This chain, including cotter pins, is comprised entirely of stainless steel and has no welded components. From the documentation submitted, the F228 attachments appear to be L-shaped plates which…
a84528 · 1996-07-02 — The tariff classification of steel chain from China and Taiwan.
, you requested a tariff classification ruling. A representative sample of the product to be imported was submitted with your request. The product to be imported is carbon steel chain used in overhead conveyance systems. This chain, also known as rivetless chain, consists of three components: center links, side links and connecting pins which connect center and side links. The applicable subheading for the carbon steel chain will be 7315.12.00, Harmonized Tariff Schedule of the United States (HTS), which provides for chain and parts thereof, of iron or steel, articulated link chain and parts…
086222 · 1990-04-02 — Leaf Chain With Bolts Attached
, you inquire as to the tariff classification of certain leaf chain from Japan. Our ruling follows. To expedite the administrative process, this decision will apply to the open entries which you state are currently pending at the port of Houston. In the future, however, please note that the internal advice procedure applies in these circumstances. FACTS: The merchandise in issue is carbon steel leaf chain with a bolt permanently attached to either one or both ends. The chain is cut-to-length and requires no post-importation processing. You state that the lifting mechanism of a forklift truck,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product