Other, suitable for use in powder-actuated handtools: — Not threaded
N267912 · 2015-09-11 — The tariff classification of energetic propellers and high resistance fasteners from France
The products under consideration are energetic propellers and high resistance fasteners for use with the Suprafix tool (not included). The Suprafix is an underwater powder-actuated hand tool that uses propellants to energetically attach a fastening pin to steel and/or concrete. This tool is intended to be used by construction personnel to fasten items without the need for welding or other complex fastening operations. It uses cartridges that utilize up to 865mg of explosive material. The subject propellers and fasteners are described as consumables utilized by the Suprafix. An energetic…
N028039 · 2008-05-15 — The tariff classification of furniture tacks and concrete pins from China and Taiwan.
You describe the first sample as decorative furniture tacks used to enhance the appearance of furniture. You state that they are of two piece construction and made entirely of steel. You refer to the second sample as concrete pins. You state that these are non threaded universal pins used by cordless fuel cell nailers and suitable for use in powder-actuated hand tools to be driven into steel and concrete. They are collated and made of steel. The applicable subheading for the concrete pins will be 7317.00.2000, Harmonized Tariff Schedule of the United States, (HTSUS), which provides for nails,…
h81997 · 2001-05-30 — The tariff classification of fasteners from Taiwan and China.
Samples for the Wood Screws and the Hammer Drive Pins were provided with your request. You have described your items as follows: 5/8 –11 x 2, Hex Cap Screws, Grade 2, Zinc Plated and made in China 12 x 2 Phillips Flat Head Wood Screws, Zinc Plated and made in Taiwan 1/4 x 1 Hammer Drive Pins made of 1062 Grade Carbon Steel and made in Taiwan. You stated that they are used with a powder-actuated handtool. These items, which are all made of steel, will be sold to hardware stores for resale to their customers. Typical uses would be for home repair, construction, etc. The applicable subheading…
d83176 · 1998-10-20 — The tariff classification of fasteners from China.
, Davis, CA. The subject steel fasteners are described as follows: 1) Zinc plated eyelet drive pin 1/4" x 1 1/2", which features a 1/4" barrel, a plastic flute with a head diameter of 1/4" with a hole diameter of 1/8" and a 0.140" diameter shank. 2) Zinc plated hammer drive pin 1/4" x 1", which features a 1/4" barrel, a 3/8" diameter metal washer, a head diameter of 1/4" and a 0.140" diameter shank. 3) Zinc plated pin 0.300" x 3", which features a 1/4" barrel, a 1" metal washer, a plastic flute with a head diameter of 1/4" and a 0.140" diameter shank. 4) Zinc plated drive pin 1/4" x 1 1/4",…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product