Other: — Of stainless steel
Part of: 73181560 — Other: — Having shanks or threads with a diameter of less than 6 mm
N313179 · 2020-07-24 — The tariff classification of various types of screws from China
The merchandise under consideration includes two types of screws: Item #1 is described as a knurled thumb screw of which there are two styles. The first style, identified in the submitted technical diagram as “Thumb Screw, Knurled, 8-32 x 15/16”, is 23 mm long with a 4 mm thread diameter. The second style, identified in the submitted technical diagram as “Thumb Screw, Knurled, 8-32 x 15” is 38 mm long with a 4 mm thread diameter. Both styles have a 19.5 mm diameter flat top with a medium diamond knurl around the outer surface of the head, are threaded along the entire length of the shaft, and…
N243086 · 2013-06-24 — The tariff classification of stainless steel fasteners from Taiwan.
You have submitted three samples for review. The first two samples, item numbers 94837 and 94237, are described as stainless steel T20 machine screws. Each fastener is fully threaded along its length and has an oval torx security head. Item number 94837 measures 8-32 x 1 5/8” and item number 94237 measures 8-32 x 1”. The third sample, item number 97637, is described as a barrel nut. This internally threaded fastener is made of stainless steel and measures 8-32 x ½”. It has a smooth shank and an unslotted head. The applicable subheading for item numbers 94837 and 94237 will be 7318.15.6070,…
N218924 · 2012-06-05 — The tariff classification of an automotive screw with washer from Japan.
You have described the item as a stainless steel M5 x 0.8 automotive screw with washer, Aisin part number G9159-1750. The Phillips square drive hex head fastener has chamfering on the underside of the head. There is a preassembled captive wave washer and flat washer under the hex head and the fastener is 14 mm long. The applicable subheading for the stainless steel M5 x 0.8 automotive screw will be 7318.15.6070, Harmonized Tariff Schedule of the United States (HTSUS), which provides for screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring…
N219375 · 2012-06-05 — The tariff classification of hold down screws from China.
The hold down screws have been described as follows: - Part number HS0208 is a 4-40 x 1.5 stainless steel slotted screw. It is used to fasten cable assemblies to electronic modules; -Part number 1501915 is a 10-32 x 1.688 hex slotted head stainless steel screw. It is used to fasten an electronic module to a base housing; - Part number 1500329 is an 8-32 x 2.06 steel screw. It has a deep slot centered on the diameter of the head and a chamfered point. It is used to fasten an electronic module to a base housing. The applicable subheading for the stainless steel screws, part numbers HS0208 and…
N168442 · 2011-06-14 — The tariff classification of slotted hex washer head machine screws from China and Taiwan.
The merchandise under consideration is described as indented slotted hex washer head machine screws. Item number 71452 is 8-32 x 3/8” and item number 71458 is 8-32 x 1-1/2”. Both items are made of stainless steel. The applicable subheading for the stainless steel indented slotted hex washer head machine screws, item numbers 71452 and 71458 will be 7318.15.6070, Harmonized Tariff Schedule of the United States (HTSUS), which provides for screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product