Set screws
Part of: 73181580 — Other: — Having shanks or threads with a diameter of 6 mm or more
N109516 · 2010-06-30 — The tariff classification of set screws from the United Kingdom.
You list item number 48 (part no. SCRE14) as “M2.5x12 Pan Head Pozi SS.” Item number 49 (part no. SCRE15) is listed as “M2.5x16 Pan Head Pozi SS” and item number 50 (part no. SCRE05) is listed as “M2.5x05 CSK Pozi SS.” You state item numbers 51 (part number SCRE71) and 52 (part number SCRE70) are socket, HT, zinc plated set screws. Item number 51 measures M6x6 and has a cup point. Item number 52 measures M5x8 and has a cone point. The applicable subheading for part number SCRE70 will be 7318.15.6040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for screws, bolts,…
N036408 · 2008-08-28 — The tariff classification of screws from Finland, Sweden and Norway.
You refer to the items as socket set screws and socket cap screws. You represent the screws by Deutsches Institut für Normung (DIN) numbers 914, 915, 916, 912 and 7991. You state that DIN numbers 914, 915 and 916 are socket set screws and used to secure shaft sleeves and liners firmly in place on marine propulsion system shafts, and other similar fastening functions. They are made of either alloy steel or stainless steel. The shank sizes vary from under 6 mm to over 6 mm. The headless screws have a recessed hexagonal hole for fastening. DIN 914 has a cone point, DIN 915 has a dog point and…
f84492 · 2000-04-17 — The tariff classification of mechanical seals and parts of mechanical seals from the United Kingdom
E.S Engineering Limited. The items in question are described as components of a mechanical seal and are identified as a gland, a clamp ring, a pivot ring, a spacer ring, a rotary, a drive band, sleeve, anti-tamper screws and grub screws. You indicate that the components may be imported separately as parts for use in the assembly of complete mechanical seals, or assembled abroad and presented upon importation as complete seals. A sample of a complete mechanical seal, as well as a sample of each of the individual components, was submitted. Mechanical seals are provided for eo nomine in heading…
d83927 · 1998-11-12 — The tariff classification of fasteners from Japan.
As was explained to you in a telephone conversation on October 21, 1998, Part # 7861-01-2370 was listed twice on page 2. The second time it should have been indicated as Part # 700-93-111730. Except for the new Ruling number and the correction to the part number, the balance of this ruling is the same as the original. In your letter dated September 24, 1998, you requested a tariff classification ruling, on behalf of your client, Komatsu America International Company of Vernon Hills, Illinois. Your submitted samples will be returned to you as requested. The fasteners are further described as…
d83177 · 1998-10-14 — The tariff classification of fasteners from Japan.
Your submitted samples will be returned to you as requested. The fasteners are further described as follows: 1) Part Number 6221-41-5410 is described as an adjust screw. It is used on the rocker arm of an excavator engine. The item consists of a partially threaded shank. The head is the same size as the shank and contains a single indentation across the width. This fastener threads through a predrilled hole, is torqued by the head with a screwdriver and then tightened with a nut. 2) Part Number 6610-41-2120 is described as a screw which is used in the cam follower housing of an excavator…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product