Of wire: — Other
Part of: 73209050 — Other
N304438 · 2019-06-12 — The tariff classification of springs from Turkey
Photographs along with a chemical analysis sheet for the subject springs were submitted for our review. The articles under consideration are identified as zig-zag springs made of carbon steel. You have indicated that the springs will be used for the production of chairs and sofas. The wire diameter of the springs is between 2.5 millimeters and 4.0 millimeters. The zig-zag springs are attached to either a wooden sofa or chair base frame and secured with brackets. The applicable subheading for the springs will be 7320.90.5020, Harmonized Tariff Schedule of the United States (HTSUS), which…
N303585 · 2019-04-09 — The tariff classification of springs from Turkey
Drawings with specifications for the subject springs were submitted for our review. You have indicated that the springs will be used on agricultural machinery. The first item under consideration is identified as a double torsion spring, reference code DTS1600001. The spring is made of steel and measures approximately 390 millimeters in length and 126 millimeters in width. The wire that the spring is made of has a cross-sectional dimension of 9.50 millimeters. The second item under consideration is identified as pick up tines, reference code PUP1800001. The spring is made of steel and measures…
N248241 · 2013-12-12 — The tariff classification of springs from Germany.
The samples are being returned as you requested. Five samples were submitted for review. You have stated that the following items are used as parts for a hydraulic oil reservoir with a piston accumulator: Part number 15684051, described as a Sleeve Spring, is a helical wire spring made of steel. The wire that the spring is made of has a cross-sectional dimension of 1.1 mm. Part number 15683051, described as an Armature Pull Back Spring, is a helical wire spring made of steel. The wire that the spring is made of has a cross-sectional dimension of 1.5 mm. Part number 15685051, described as a…
N084421 · 2009-09-23 — The tariff classification of a disc wheel center cap spring from Japan.
You have described part number MB579402 as a spring, disc wheel center cap (PNC 32844). It is made of steel wire that is approximately 1.8 millimeters (mm) in diameter. It is formed into a 68 mm diameter circular component with a 38 mm opening at one end. The open ends are bent towards the interior of the circle and there are three strategically placed indentations around the ring. In use, the spring applies tension to the tabs of the wheel cap ornament for attachment to the wheel. The applicable subheading for the spring, disc wheel center cap will be 7320.90.5020, Harmonized Tariff Schedule…
N012809 · 2007-06-20 — The tariff classification of iron springs from China.
The merchandise is described as an iron wire spring used in a seat or sofa. It is a zig zag spring that is placed on the underside of a seat or sofa and is held to the wooden frame with metal brackets. They are used as support to the inner part of a seat or sofa. The applicable subheading for the wire springs will be 7320.90.5020, Harmonized Tariff Schedule of the United States (HTSUS), which provides for springs and leaves for springs, of iron or steel: other: other: of wire: other. The rate of duty will be 2.9% ad valorem. Duty rates are provided for your convenience and are subject to…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product