Other
Part of: 73261900 — Forged or stamped, but not further worked: — Other
N344289 · 2024-12-10 — The tariff classification of steel sheets from South Korea
Product descriptions and pictures were submitted for our review. The article under consideration is pre-cut steel sheet, which is a raw material, identified as part number 64312-AR000_BLK. You indicated in your letter that prior to importation the raw material will undergo a blanking/stamping process performed in South Korea to produce the steel sheet in condition as imported into the United States. You stated the raw material “goes through press processing (blanking) with a special mold made to match the width and thickness of the steel sheet…and cutting in the process is cutting to create…
N340183 · 2024-06-03 — The tariff classification of a drum back and drum front from South Korea
Descriptions and pictures of the drum back and drum front were submitted for our review. The articles under consideration are two components of a washing machine drum. The first article is identified as a drum back, item number DC66-00885A. It is imported as a thin, flat, near-circular shaped, non-forged stainless-steel sheet that has a thickness of 0.5 mm. The drum back has a width of 715 mm and a length of 715 mm. The shaping of the drum back is obtained through a blanking process from a flat rectangular steel sheet, with no further surface or metal working applied post blanking. In the…
N303460 · 2019-04-09 — The tariff classification of pre-cut steel sheets from South Korea
, LTD. Pictures and a specification sheet for the pre-cut steel sheets were submitted for our review. The articles under consideration are identified as pre-cut metal sheets made of steel. You indicated in your letter that only the press work (stamping) manufacturing process will be performed in Korea and the stamped article will be used as a cushion panel assembly. The stamped article will need additional manufacturing processing including piercing and bending which will be done in the United States. The approximate dimensions of the stamped sheet will be 680 mm x 330 mm x 8 mm. After the…
N297181 · 2018-06-15 — The tariff classification of steel lid discs from Taiwan
Descriptive literature and photographs of the steel lid discs were submitted for our review. The articles under consideration are described as steel lid discs for steel drum tops and bottoms. You indicated that after the factory in Taiwan receives the coils from the steel manufacturer, the coils are loaded onto a derailer that feeds a stamping press machine that stamps out the discs. The discs are then stacked on a skid for final packaging before being shipped to the United States. The size of each disc is approximately 1.1 mm in thickness with an outside diameter of 23.375”. Future business…
d85747 · 1998-12-24 — The tariff classification of steel circles from Brazil.
The items to be imported are flat-rolled steel circles which have been stamped from cold-rolled steel sheet. They will be imported in different diameters including 641.35 mm, 644.5 mm and 647.7 mm. After importation, they will be further processed into heads and bottoms of steel drums. The applicable subheading for the steel circles will be 7326.19.00, Harmonized Tariff Schedule of the United States (HTS), which provides for other articles of iron or steel, forged or stamped, but not further worked, other. The duty rate will be 3.5 percent ad valorem. Effective January 1, 1999, the rate of…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product