Other
Part of: 74198050 — Other: — Other
N356141 · 2025-12-11 — The tariff classification of a machined copper ring from Germany
Technical information was submitted with your request. The item under consideration is a machined copper ring (Item 151H295-A). As described, it will be used as a semi-finished component in a thrust bearing assembly for heavy-frame gas turbines in the electric power generation industry. You state the ring is produced from a copper-chrome alloy forging which undergoes machining and finishing operations such as the drilling and tapping of holes. Allowing for slight variations, the ring will feature an outside diameter of 18.19 inches and an inside diameter of 10.69 inches. Additionally, the…
N351692 · 2025-08-12 — The tariff classification of snap hooks from multiple countries
Product information was submitted with your request. The items under consideration are four models of snap hooks which will be used as connection hardware. Model 225B (from Malaysia, Taiwan, or Vietnam) is composed of brass (61% copper, 35% zinc, 4% other material) and features a round 1-inch eye, 3/8-inch opening, and an overall length of 3 5/8 inches. Model 5013Z (from Taiwan) is composed of diecast zinc, with nickel finish, and features a round 1-inch eye, 3/8-inch opening, and an overall length of 3 1/8 inches. Model 5015Z (from Taiwan) is composed of diecast zinc, with nickel finish, and…
N351696 · 2025-08-12 — The tariff classification of rope clamps and snap hooks from multiple countries
Product information was submitted with your request. The first items under consideration are described as rope clamps (model HRCB) from Malaysia, Taiwan, or Vietnam. During use, two strands of rope are inserted lengthwise through the center portion of the clamp to hold the ropes in a fixed and secured position. You state that the rope clamps are composed of brass (61% copper, 35% zinc, 4% other material) and measure 5/8 inches in inside width and 1 1/2 inches in overall length. The second items under consideration are described as snap hooks which will be used as connection hardware. Model…
N337114 · 2024-01-08 — The tariff classification of copper mesh sheets from China
Samples, descriptions, and pictures of the copper mesh sheets were provided for our review. Your submitted samples will be retained in our office. The product under consideration is described as a copper mesh sheet that is comprised of a top layer made of 100 percent polyester woven fabric, a middle layer made of 100 percent fine woven 0.128 mm copper mesh, and a bottom layer made of 100 percent polyester woven fabric. You indicated that “The copper mesh core is cut to size, then a layer of fabric is glued on the top and the bottom of the copper mesh, and the edges are sewn on the perimeter.”…
N334565 · 2023-08-22 — The tariff classification of a metal clip with pen holder from China
Product descriptions and photographs of the metal clip with pen holder were provided for our review. The article under consideration is identified as a metal clip with pen holder. The article is comprised of a metal clip made of brass that is attached to a loop made of polyurethane (PU). The loop is secured to the clip with two brass fasteners. You stated in your letter that “The intended use for this item is to slide the metal clip onto the cover of a date planner, journal or notebook and to use the looped material to hold a writing utensil such as a pen or pencil. The metal clip is not…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product