Other: — Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils
Part of: 76012090 — Other: — Other
N307956 · 2019-12-18 — The classification of unwrought aluminum billets from France
The articles in question are described as unwrought aluminum alloy billets that have not been machined, forged, or rolled and are still in ingot/ billet form. They are between 340 mm and 630 mm in length and each billet is 134 mm in diameter. You state the predominate metal is aluminum, but it is alloyed. You have provided two composition ranges. The first is described as aluminum ranging from 98.0 percent to 99.9 percent by weight, alloyed with copper ranging from 0.1 percent to 2.0 percent by weight. You suggest classification in 7601.20.9045, Harmonized Tariff System of the United States…
N301439 · 2018-11-21 — The tariff classification of aluminum billets from South Korea
The products to be imported are identified as aluminum billets. The billets are described as having varying widths between 6 inches and 11 inches. In accordance with the additional information you provided, it was determined the billets are aluminum alloy. Aluminum alloy scrap of United States (US) is shipped to South Korea where it is melted down with nonalloy aluminum ingots from Australia and then made into billets. The applicable subheading for the aluminum billets will be 7601.20.9045, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Unwrought aluminum:…
g82889 · 2000-11-06 — The tariff classification of an aluminum billet from Venezuela and Canada.
, Canovanas, PR, you requested a tariff classification ruling. You have described your submitted sample as a primary cylindrical aluminum billet 7” x 18”, product code BI-606080-7X18. This billet, which is made by a semi-continuous vertical casting process, is used for the extrusion of aluminum. The chemical analysis for this item is as follows: silicon 0.45%, iron 0.17%, copper < 0.01%, manganese 0.03%, magnesium 0.43%, chromium < 0.01%, zinc 0.01%, titanium 0.01%, nickel 0.01%, boron <0.001%, sodium 0.001% and the balance is aluminum. The applicable subheading for the aluminum billet will…
f82771 · 2000-02-14 — The tariff classification of aluminum billets from Canada.
Your submitted sample is an aluminum billet that will be imported in 4 sizes. They are further described as follows: 1) Product code BI 606310C-8X28: 8” in diameter x 28” in length. 2) Product code BI 606310C-8X26: 8” in diameter x 26” in length. 3) Product code BI 606310C-8X24: 8” in diameter x 24” in length. 4) Product code BI 606310C-8X22: 8” in diameter x 22” in length. Each of these products have the aluminum alloy designation 6063. The magnesium percentages for each were above 0.10 rendering them as alloys of aluminum. The applicable subheading for the aluminum billets if of uniform…
955367 · 1994-07-21 — Protest 0201-93-100281; Aluminum Alloy Ingot; Titanium; Boron; Grain Refiner; CFTA eligibility; General Note 3(c)(vii)(B); GRI 3(b); Section XV, Notes 3 and 5; De Minimis Test; T.D. 92-8
The following is our decision regarding Protest 0201-93- 100281 concerning your action in classifying and assessing duty on aluminum alloy ingot under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The merchandise consists of aluminum alloy ingot imported from Canada. The ingot possesses a non-North American (i.e., United Kingdom) grain refiner (titanium or boron), the quantity of which is so small that it may be measured in the finished product only in terms of parts per million. During manufacture in Canada, grain refiner is added to the ingot to achieve desired grain…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product