Other: — Cut to shape, of a thickness not exceeding 0.15 mm
Part of: 760719 — Not backed: — Other:
N344826 · 2025-01-10 — The tariff classification of aluminum foil lidding stock from Germany
The products under consideration are identified as Aluthene® 70 IIE 116/8 and Aluthene® 70IIE 116/9. Both products are multi-layered aluminum foil lidding stock used for packaging of contact lenses. According to your submission, Aluthene® 70 IIE 116/8 is comprised of three layers: 1) lacquer, 2) aluminum foil, and 3) polypropylene. The thickness of the layers of lacquer, aluminum foil, and polypropylene is 0.001 mm, 0.07 mm, and 0.022 mm, respectively, for a total thickness of 0.092 mm. The Aluthene® 70 IIE 116/9 is comprised of six layers: 1) overlacquer, 2) color, 3) white ink, 4)…
N323789 · 2022-02-07 — The tariff classification of disposable aluminum ware from China
Photographs of the items and product information were submitted along with your ruling request. The items under consideration are referred to as disposable aluminum ware and are designed to be used in foodservice establishments. The first item is Food Service Interfolded Pop-Up Foil Sheets, Model #RD-APF-500. According to your submission, these boxed, pre-cut, striped aluminum foil sheets measure approximately 9 inches in length, 10 ¾ inches in width and .007 – 0.02 millimeters in thickness. The sheets dispense one at a time and are used to keep hamburgers, hot dogs, sandwiches, etc. and…
N299447 · 2018-08-28 — The tariff classification of aluminum foil sheets from China
The product you intend to import is described as unbacked rectangular aluminum foil measuring 10.75 inches in width and 13.375 inches in length. The thickness is 0.07 mm. It is described as rolled, annealed, trimmed slit, annealed again, cooled and packaged into big rolls of aluminum foil. At the second manufacturing facility the large rolls are “pulled through a dimpling machine” to create dimples on the surface of the foil, cut into rectangular sheets, folded, sorted and packaged in retail boxes. The issue is the dimpling, which creates an uneven appearance on the foil and is also claimed…
N238789 · 2013-03-22 — The tariff classification of decorative plastic and metal laminates from Canada.
Representative samples were included with your submission and will be retained by this office. The items under consideration are described as decorative plastic and metal laminates for both residential and commercial use. You state that these laminates are suitable for application to interior surfaces where a decorative wear stain and impact resistant surface is required such as countertops, tabletops, cabinets, furniture, etc. The plastic laminates are sheets made of plain, colored or decorative paper coated or impregnated with melamine-formaldehyde resins which are pressed together with…
N230615 · 2012-09-12 — The tariff classification of beBond ACP sheets from China.
A representative sample was included with your submission and will be retained by this office. The products under consideration are described as beBond ACP sheets, composite articles comprised of a polyethylene core sandwiched and permanently bonded between two Alloy 1100 aluminum sheets. These sheets meet the Chapter 76, Subheading Note 1(a) definition of not alloyed and range in thickness from 0.1 mm to 0.2 mm. They are available in a variety of cut sizes (4’ X 8’, 4’ X 10’ and 5’ X 10’) and are used in the signs and graphics industry. In your request, you indicate that the sheets are…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product