Threaded fasteners
Part of: 76161070 — Other: — Having shanks, threads or holes over 6 mm in diameter
N322122 · 2021-11-01 — The tariff classification of two aluminum fasteners from Germany
The items under consideration are identified as Bolt Sleeve (Small), Part # 557420 and Bolt Sleeve (Large), Part # 557430. Each bolt sleeve is made of aluminum that is cold forged, heat treated, and machined. The small bolt sleeve has a shank 20 mm in dimeter, a head with 10 mm of internal threading, and 13 mm of external threading just below the head. The large bolt sleeve has a shank 22 mm in dimeter, a head with 16 mm of internal threading, and 16 mm of external threading just below the head. The bolt sleeve is threaded into an aluminum profile of the battery tray of an electric passenger…
N242008 · 2013-05-22 — The tariff classification of base metal jet ski components from Taiwan
The merchandise under consideration is several base metal components used in the steering assembly of a jet ski. Part number TR-23.5/TR-26/TR-28 is made of stainless steel and described as a Threaded Rod for RRP Handle Poles. It is threaded on both ends and smooth in the middle. They are used to secure the handlebar to the steering system of a jet ski. One end is secured into the steering system and the other end is attached to the handlebar with a nut. You have stated that the part is available in lengths of 23.5 cm, 26 cm and 28 cm. The applicable subheading for part number…
R00077 · 2004-01-22 — The tariff classification of a wheel center nut from Germany.
You have described your item as a wheel center nut, part number 980 331 307 00, which is a racing style threaded aluminum fastener used for mounting an automotive wheel to the hub, which is also threaded. The nut has a wave shaped, multi-toothed external profile and can be installed and removed only with a special nut socket driver. The bearing side of the nut is tapered in order to properly center the wheel on the hub. The approximate dimensions are: 100 mm in radius with a 50 mm center opening and 60 mm in depth. You state that the nut is internally threaded. The applicable subheading for…
J85291 · 2003-06-12 — The tariff classification of an aluminum fastener from China.
You have described your sample as an aluminum pentagon head bolt, 1 ½” in length, which will be used in the assembly of a curb box. Its diameter is approximately ½”. You state that it is made from 6061-T6 grade aluminum, gold alumilite Alcoa 145 anodized. The applicable subheading for the aluminum fastener will be 7616.10.7030, Harmonized Tariff Schedule of the United States (HTS), which provides for other articles of aluminum: nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles: other: having…
h88897 · 2002-03-04 — The tariff classification of blind rivet nuts and blind rivet studs from France.
, located in Portsmouth, NH, you requested a tariff classification ruling. You have described your items as blind rivet nuts and blind rivet studs. The nuts will be made of steel and aluminum. The studs will be made of steel. The diameters of these fasteners come in various metric sizes (mm). You state that all of these items are threaded and intended for fastening and securing sheet metal and plastic materials. The applicable subheading for the steel blind rivet nuts will be 7318.19.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for screws, bolts, nuts, coach…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product