Cermets and articles thereof, including waste and scrap
Part of: 81 — Other base metals; cermets; articles thereof
N276843 · 2016-07-22 — The tariff classification of chromium carbide cermet from Canada
The product you intend to import is described as chromium carbide powder for thermal spray. Technical data submitted shows the products to be sintered and crushed. They are used for high temperature wear, oxidation and corrosion resistance. The thermal spray product specified is Metco 70C-NS. The compositions are shown to be Chromium 86% and Carbon 13% The applicable subheading for the chromium carbide thermal sprays will be 8113.00.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for cermets and articles thereof, including waste and scrap. The rate of duty will…
N275936 · 2016-06-21 — The tariff classification of tungsten carbide nickel thermal spray powder from Germany
The product you plan to import is described as tungsten carbide nickel thermal spray powder which is composed of 75 percent tungsten, 19.5 percent nickel and 5.5 percent carbon. The product is identified as Woka 3500 Series. The powder is described as agglomerated and sintered. It is of a particle size that qualifies as powder, as defined in Section XV of the Harmonized Tariff Schedule of the United States (HTSUS), Note 8 (b). It is intended to be used in the HVOF or Plasma spray process and is said to function as a cermet. The applicable subheading for the Woka 3500 Series tungsten carbide…
N274131 · 2016-04-08 — The tariff classification of tungsten carbide thermal spray powder from Germany
The products you intend to import are described as tungsten carbide cobalt chromium thermal spray powder. Technical data submitted shows the products to be sintered and crushed. They are used for dense abrasion and erosion resistant coatings. The two thermal spray products specified are Amdry 5843 and WOKA 3903. The compositions are shown to be Tungsten: Balance (which calculates to 76 - 82%) , Carbon: 4.9 - 6%, Cobalt: 9 - 11%, Chromium: 3.1- 4.9%, and a maximum of 2% other elements. The applicable subheading for the tungsten carbide thermal sprays will be 8113.00.0000, Harmonized Tariff…
N272677 · 2016-03-04 — The Classification of Tungsten Carbide Cobalt Chromium Powder from Germany
Specifically, you request classification rulings for the seventeen products listed below. Metco™ 5163, Metco™ 5164, Metco™ 5165, Metco™ 5847, Metco™ 5847-45, Woka™ 3651, Woka™ 3652, Woka™ 3652 FC, Woka™ 3653, Woka™ 3653 FC, Woka™ 3654, Woka™ 3654 FC, Woka™ 3655, Woka™ 3657, Woka™ 3660 FC, Woka™ 3661 FC, and Woka™ 3665. These products differ both in primary carbide grain size and by percentage of total product for the cobalt (between 8.5% and 11.5%), Chromium (between 3.2% and 4.8%) and Carbon (between 4.8% and 5.6%). The remaining balance of the product is tungsten. These differences do not…
N163663 · 2011-08-16 — The tariff classification of hard metal sludge powder from India.
A representative sample was submitted with your ruling request and was sent to our Customs laboratory for analysis. The product to be imported is referred to as Hard Metal Sludge which is the result of de-coating hard metal scrap inserts by processing in a ball mill. The sludge produced from the milling process is comprised primarily of tungsten, cobalt and tantalum with smaller concentrations of trace elements. Prior to importation, it will be dried, crushed into a fine powder and homogenized. Once in the United States, this tungsten carbide powder is further processed for the recovery of…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product