Suitable for interior and exterior doors (except garage, overhead or sliding doors): — Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons
Part of: 83024160 — Other: — Of iron or steel, of aluminum or of zinc
N355570 · 2025-11-19 — The tariff classification of T-pull door closers from Canada
Item 1 is described as Plastic T-Pull Door Closers, Models TP03B and TP03W. These are T-shaped handles that can swivel 90 degrees to allow a user to pull a door shut without having to rotate their torso or shoulders. The T-Pull is made of injection-molded acrylonitrile-butadiene-styrene (ABS) plastic. It measures 8.5 in (L) × 2.5 in (W) × 0.5 in (H) and weighs 2.3 oz (65 g). It is attached to the door with either pre-installed adhesive tape or it can be screwed in place for permanent installation. You state these handles are designed for wheelchair users (limited reach/rotation), seniors with…
N334940 · 2023-09-15 — The tariff classification of an aircraft galley door and a kick plate from Mexico
Pictures, product descriptions, technical drawings, and bills of material were provided. The articles under consideration are a Galley Door Assembly, Part # 9876205-501, and a Galley Kick Plate, Part # 9876101-1, which are installed in the galley of a commercial aircraft. The galley door assembly is described as a subcomponent of the Galley Top Assembly 9876001-101. You state that there are different galley door configurations and submitted technical photographs and drawings of a representative type of door. The door construction consists of a nomex honeycomb core panel, aluminum hinge,…
N311440 · 2020-05-12 — The tariff classification of foot door pull from India
The merchandise under consideration is described as "Foot Door Pulls for Interior or Exterior Doors". The foot door pull is an ‘L’ shaped device that allows a person the option of opening a door using their foot instead of their hand. Each door pull measures 3.94 inches wide by 2.95 inches long by 1.38 inches high and is mounted on a door near the floor. One end of the door pull has three holes to accommodate mountings screws while the other end features serrated teeth to grip the bottom of a person’s shoe. According to the information you provided, the foot pulls are available in two models:…
L88708 · 2005-11-08 — The tariff classification of door hardware from China
The samples you provided are a door lever, a door pull and an escutcheon. The door lever (part number 972331/922332) is made of brass. It will be used for a passive (non-locking) door. The door pull (part number 1500-127) is made of chrome-plated brass. It does not turn or lock, but will be mounted on a door and used to pull it open. The door escutcheon (part number 1500-125) is made of chrome-plated zinc. It is a decorative plate that fits over the lock and lever openings on a door. The applicable subheading for the brass lever will be 8302.41.9045, Harmonized Tariff Schedule of the United…
g81087 · 2000-08-25 — The tariff classification of hardware from the United Kingdom
The merchandise is a variety of hardware, illustrated in a catalog of handles and fittings. Normally, ruling requests should contain a maximum of 5 items in order to be accepted. However, since many of the items in this request are of the same class or kind, we can supply classifications for most of them. Any article not classified may be resubmitted in another request. The various door hinges, including lift-off, fixed pin, projection, rising-and-falling, cabinet, butt and ball bearing hinges, are made of steel. The applicable subheading for the lift-off, fixed pin, projection,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product