Other
Part of: 830820 — Tubular or bifurcated rivets:
N337242 · 2024-01-17 — The tariff classification of two steel rivets from Germany
The articles under consideration are described as two button head fastening rivets, both made of boron steel with a zinc/tin aluminum co-deposit mechanical plating. The first rivet, DTNA part number 23-12208-012, has a total length of 5 mm, a shank-hole depth of 3.5 mm, a shank diameter of 3.35 mm, a hole diameter of 2.1 mm, and a head diameter of 5.5 mm. The shank hole depth of part number 23-12208-012 is less than 112 percent of the shank diameter. The second rivet, DTNA part number 23-12208-016, has a total length of 6 mm, a shank-hole depth of 4 mm, a shank diameter of 3.2 mm, a hole…
N292271 · 2017-12-12 — The tariff classification of an aluminum and steel peel rivet from China
The merchandise under consideration is a blind rivet. The rivet is made of aluminum, and the mandrel is made of steel. According to your documentation, the rivet sleeve is 1/4" in diameter and the flange is ½” in diameter. The grip range is 1/32” - 9/64”. This rivet is used by the automotive industry; its main function is to fasten a window regulator motor to the door of an automobile. We disagree with your proposed classification of 7616.10.3000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Other articles of aluminum: Nails, tacks, staples (other than those of…
N215095 · 2012-05-03 — The tariff classification of a blind rivet from an unknown country
The merchandise under consideration is described as a “Rivet, Blind–General Purpose, Bulbed, 100° Flush Head, Mechanically-Locked-Spindle,” part number NAS1921M05S05U. It is a blind rivet made of Monel, which is a nickel-copper alloy. It comprises a shank that measures between 0.155 inches and 0.159 inches in diameter and a drive anvil washer that enables it to be installed with blunt nosed installation tooling. This rivet is used in the aerospace industry; its main function is to fasten a door latch to an aircraft’s ground power panel door. The applicable subheading for the nickel-copper…
N070120 · 2009-08-04 — The tariff classification of rivets from Hong Kong
The samples you submitted will be retained by this office. The merchandise under consideration is rivets that are used as decoration on wearing apparel. Each consists of two parts, a tubular rivet and a cap. They will be made of either brass or zinc. The applicable subheading for the rivets will be 8308.20.6000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for clasps, frames with clasps, buckles, buckle clasps, hooks, eyes, eyelets and the like and parts thereof, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up…
g86768 · 2001-02-05 — The tariff classification of golf bag components from Taiwan
Mr. Alberdi: In your letter dated December 8, 2000, and received by this office on February 1, 2001 you requested a tariff classification ruling on behalf of Seal Golf Equipment. The samples you submitted are tubular steel rivets, a reinforced steel plate, and a steel ring with a hook and loop fastener attached. After importation, these components will be used to assemble golf bags in the United States. The steel plate will be used to fasten a shoulder strap to the bag, and the steel ring with a hook and loop fastener will be riveted on the bag to hold golf towels and gloves. The applicable…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product