Brazed aluminum plate-fin heat exchangers
Part of: 841950 — Heat exchange units:
N333169 · 2023-06-12 — The tariff classification of cooler assemblies from China
The items under consideration are identified as aluminum cooler assemblies that are used to cool various fluids in a SKYTRAK telehandler. The assemblies are described as a type of cooler that uses a bar, plate, and fin design, the components of which are joined using a brazing process. Part number 2951523 is a charge air cooler measuring 856 mm in length, 113 mm in width, and 135 mm in height. Part number 2951524 is a fuel cooler measuring 820 mm in length, 75 mm in width, and 100 mm in height. Part number 2951525 is a hydraulic oil cooler measuring 807 mm in length, 178 mm in width, and 112…
N324894 · 2022-04-04 — The tariff classification of aluminum welded channel coolers from China
DBA HydroMassage. The part under consideration is referred to as an “aluminum welded channel cooler” used in beds and loungers. The cooler is imported under part numbers BIG-0800, BIG-0801, and BIG-0804. While the part numbers differ in dimensions, the design of each cooler is the same. Each unit consists of two electric fans mounted on a brazed aluminum plate-fin heat exchanger. The function of the cooler is to remove heat that is generated by the internal water pressure during a massage. The unit is connected to a circulating water supply within a chair, bed, or lounger. Heated water enters…
N321962 · 2021-10-20 — The tariff classification of a roof mounted hydraulic oil cooler from Italy
The item under consideration is a Universal Hydraulic Oil Cooler, part number 600000416. The roof mounted hydraulic oil cooler provides additional cooling of hydraulic oil and can be installed either in front or behind the original oil cooler in a skid steer. The unit measures 31 inches long by 30 inches wide by 16 inches tall and weighs 220 pounds. It includes an oil cooler core, protective box, inlet and outlet ports, electric fan, fan controller, temperature sensor, and miscellaneous hardware. The oil cooler core is made of brazed aluminum and plate-fins. The unit cools hydraulic oil that…
N292834 · 2018-01-17 — The tariff classification of a heat exchanger from Canada.
Descriptive literature and drawings were included in your submission. The Hoval SV Heat Exchanger is described as an air to air heat exchanger. The unit is used in HVAC units installed in industrial and commercial buildings and its function is to heat and cool fresh air. The unit is cube shaped and consists of aluminum plates. The surface of each aluminum plate is specifically configured to allow the transfer of heat energy from the unit’s warm side to its cool side. The applicable subheading for Hoval SV Heat Exchanger will be 8419.50.1000, Harmonized Tariff Schedule of the United States…
N212217 · 2012-04-23 — The tariff classification of a radiator for lawn mowers from China
The item under consideration is a radiator used for engine cooling. You state, the radiator is made of 100% brazed aluminum. The radiator is constructed using a stack and build design where multiple pieces of aluminum are arranged to build captive fluid channels for solid media (oil), to be channeled over an internal lanced offset turbulator. Then, it is separated by an airside channel consisting of a thing gauge of wavy aluminum fins. These radiators are used solely in commercial riding lawnmowers, either deck mowers or reel mowers. The applicable subheading for the radiator for lawn mowers…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product