Die casting machines
Part of: 84543000 — Casting machines
E88022 · 1999-10-13 — The tariff classification of a Thixomolding Machine from Canada.
Thixomolding is a process for the production of parts from magnesium alloys using an injection molding machine. The process consists of putting room temperature magnesium alloy granules into the barrel of the machine, and then raising the temperature of the material to its semi-solid region (560-580C) while it is sheared and carried forward by the action of the screw. The resulting semi-solid slurry, consisting of solid magnesium particles suspended in liquid metal, is then injected into a mold preheated to between 175 and 250C. The Thixomolding Machine is of similar design to that of a…
a86776 · 1996-09-03 — The tariff classification of a squeeze casting machine and dies from Japan
The squeeze casting machine is used in a metallurgical casting process to produce aluminum components, mainly automotive parts. In the "squeeze casting" process, aluminum is introduced into the die cavity. A production cell which uses an integrated manufacturing system and a double-piston vertical squeeze mechanism produces the desired component. Interlocked computers coordinate the metal flow and cooling systems to achieve very rapid directional solidification and fast cycle times. In your letter, you also inquire about dies. Molds used in die casting are referred to as "dies". Since the…
814806 · 1995-09-22 — The tariff classification of die casting machine from Italy
The Die Casting Machine C40 is a semi-automatic, hydraulic die casting machine for the gravity die-casting of brass, bronze, and non-ferrous alloys in general. The unit is a cold chamber machine. It does not include a melting furnace. Machine features include automatic front or side pouring, independent dipping of each die half and fully automatic cycles which may be regulated by timers. The applicable subheading for the Die Casting Machine C40 will be 8454.30.0010, Harmonized Tariff Schedule of the United States (HTS), which provides for Converters, ladles, ingot molds and casting machines,…
899264 · 1994-07-13 — The tariff classification of lead wire manufacturing equipmentfrom Germany.
You have provided a description of the lead wire manufacturing process, a quotation for the equipment to be imported and copies of pictures of the major components. The process begins with the melting of 60 pound lead ingots in a furnace. The resulting liquid lead is continuously stirred and pumped to a twin strand die cast machine holding pot. Two hydraulic powered pistons in the pot push the liquid lead through cooling dies to form two rods. A pair of shears at the end of the die cast machine shear the rods into billets. The billets are then transferred by a combination conveyor/preheat…
951569 · 1992-04-23 — Internal Advice 18/92; Furnace; Die Casting Machine; C.S.D. 83-83; Functional Unit; Section XVI, Note 4; Section XVI, Note 2(a)
FACTS: The subject merchandise consists of a die casting machine. The importer placed an order with its parent-supplier for a complete die casting machine. However, the furnace for the machine, shipped the same day as the remainder of the machine, was laden on a different vessel. The furnace arrived in Chicago, Illinois, on December 14, 1991, while the remainder of the die casting machine arrived in Newark, New Jersey, on December 17, 1991. ISSUE: Whether, for classification purposes, the furnace and the remainder of the die casting machine, imported in separate shipments, make up a…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product