8457 10 00 05

Code

8457 10 00 05

Type

10-digit tariff line

Duty rate

4.2% (set at subheading 84571000)

Unit

No.

Classification rulings (U.S. Customs, CROSS)

• N025253 · 2008-04-24 — The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a horizontal machining center from Canada; Article 509

  The machine in question is a used Makino 5 Axis Horizontal Machining Center Model MCC-2013. The machine was originally manufactured in Japan. It was subsequently purchased in late 2004 and imported into Canada in early 2005 at which time the appropriate Canadian duties were paid. The machine was used in production for three years. Your firm is purchasing this machine from a U.S. company on a “sold as is/where is” basis. The machine will be imported from Missasauqua, Ontario, Canada. In your letter, you propose classification in subheading 8457.10.0065, Harmonized Tariff Schedule of the United…

• 950253 · 1991-12-11 — Axis Profiler; Machining Centers; Surface Grinder; Pedestal Grinder; Lathe; Manual Milling Machine; Cut-Off Saw; EN 84.57; EN 84.58; EN 84.59; EN 84.60

  You also inquired about the dutiable status of completely depreciated machinery. This portion of your inquiry has been referred to the Value and Marking Branch because it concerns an issue within their jurisdiction. The Value and Marking Branch will issue a separate value ruling. The classification ruling follows. FACTS: Burgess Machine & Tool, Inc., has been recently incorporated in Michigan. Several pieces of equipment in use at their Canadian facility will be moved to Michigan. The merchandise in question is as follows: an Axis Profiler; two Horizontal Machining Centers (serial #147 and…

• 868814 · 1991-12-10 — The tariff classification of a used machining center fromJapan.

  Model BF-16A(NC) (serial number 51306) is a numerically controlled floor type machining center equipped with an automatic tool changer. The machine performs highly accurate and efficient machining such as boring, drilling and milling. The unit has a spindle diameter of 160 mm and a spindle speed (continuous) of 10 - 1250 rpm. The unit was manufactured by Toshiba, Japan in 1975 and subsequently shipped to Toshiba Machine Co. America, Elk Grove Village, Illinois. In 1981, the machine was sold and shipped to the Canadian General Electric Company ("CGE") located in Ontario, Canada. When CGE was…

• 085703 · 1989-12-07 — Machine tool

  FACTS: The merchandise in question, the Yamaguchi Aluminum Wheel Drilling Machine, Model YMV-60MW-E, has been manufactured to Enshu Keigokin's (Japan) specifications. The machine is then sold to Tohlease and subsequently leased to Enkei America, a company related to Enshu Keigokin. Enkei America manufactures wheels for road vehicles, and will use the machine in a wheel manufacturing line. The machine is not for resale. The machine is equipped with auxiliary drilling units which are specially designed to perform a valve stem drilling function, without removing the workpiece. The spindle speed…

• 8457 10 00 15 — Other: — With automatic tool changers — Vertical-spindle machines with a Y-axis travel of-- — Not over 660 mm
• 8457 10 00 25 — Other: — With automatic tool changers — Vertical-spindle machines with a Y-axis travel of-- — Over 660 mm
• 8457 10 00 55 — Other: — With automatic tool changers — Horizontal-spindle machines with a Y-axis travel of-- — Not over 685 mm
• 8457 10 00 60 — Other: — With automatic tool changers — Horizontal-spindle machines with a Y-axis travel of-- — Over 685 mm but not over 1,016 mm
• 8457 10 00 65 — Other: — With automatic tool changers — Horizontal-spindle machines with a Y-axis travel of-- — Over 1,016 mm
• 8457 10 00 70 — Other: — With automatic tool changers — Other
• 8457 10 00 75 — Other: — Other

• 84571 — ТН ВЭД ЕАЭС: центры обрабатывающие:
• 845710 — EU CN/TARIC: Machining centres

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.