Other
Part of: 846691 — Other: — For machines of heading 8464:
N130195 · 2010-11-23 — The tariff classification of an electro-spindle from Italy.
You describe the instant merchandise as an electro-spindle that is specifically designed for use in CNC multi-axis stone milling, cutting and processing machines. The electro-spindle is used in a Park Industries® Titan 1800 CNC Stonecenter. The submitted literature indicates that this machine is used to saw, core, mill, shape and polish stone countertops. The stainless steel electro-spindle incorporates a motor magnet and has a variable speed up to 10,000 RPM. The applicable subheading for the electro-spindle will be 8466.91.5000 , Harmonized Tariff Schedule of the United States (HTSUS),…
089556 · 1991-07-01 — Classification of MH Polishing Pads
FACTS: The subject polishing pads are made of polyurethane plastic and are designed for polishing a variety of surfaces including glass, ceramics, semiconductor wafers and aluminum disks. The pads are used in connection with double sided polishing machines, themselves classified as machine tools under subheading 8464.20.00, HTSUSA. These machines grind, lap and polish both sides of a workpiece simultaneously. During double side processing, workpieces are placed between upper and lower lapping plates, which are rotated in opposite directions. Sandwiched between the plates is a water or oil…
088300 · 1991-03-06 — Industrial Saw Blades, Cold Rolled Carbon Steel; Polished Steel Strips Cut-to-Length, Unsharpened, Toothless, Used in Quartz Crystal Saws; Machine Tool Parts and Accessories
Your letter of November 1, 1990, to the Area Director of Customs, New York Seaport, on the issue of saw blades from South Korea, has been referred to Headquarters for reply. Our ruling follows. FACTS: The articles in issue are of cold rolled 1095 carbon steel. They are cut-to-length, typically 16 1/4 and 20 1/4 inches, 1/4 or 5/16 inch wide, and 0.2mm thick. Submitted literature indicates that up to 250 of these blades comprise a blade pack or blade head used with the Shure-Cut model 20 quartz crystal saw. Saws of this type are commonly used to cut such materials as quartz, silicon, glass and…
856755 · 1990-10-25 — The tariff classification of saw blades from Korea
The blades are made of 1095 carbon steel, cold rolled to a thickness of .2mm by a width of 1/4" and/or 5/16", cut into lengths of 16-1/4" and/or 20-1/4". These unsharpened, toothless blades will be incorporated into blade heads that are used in crystal quartz wafer saws. The saw's reciprocating blade head may contain up to 250 of these blades, pre-spaced and highly tensioned. Abrasive liquid is mechanically distributed over the blades which are brought into contact with the workpiece. Cutting is accomplished by the back and forth motion of the abrasive liquid, not the blades. The applicable…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product