Other
Part of: 84679200 — Parts: — Of pneumatic tools
N297126 · 2018-06-11 — The tariff classification of abrasive discs and backing pads from China.
The merchandise under consideration is two styles of abrasive discs referred to as Gold Paper Disc, model number Y399, and Green Film Disc, model number G369, and two styles of backing pads. Samples were submitted with your ruling request and will be returned to you. The Gold Paper Disc and Green Film Disc both measure approximately 5 inches in diameter. The Gold Paper Disc is comprised of a paper backing coated on one side with aluminum oxide abrasive grain, while the reverse features a hook-and-loop surface. The Green Film Disc is comprised of a polyester film backing coated on one side…
N296136 · 2018-05-15 — The tariff classification of a Back Up Pad from China
Submitted representative sample, i.e., a 6” back up pad with (1) a 5/16-24 bolt for attaching to the tool and (2) no holes in the pad, will be returned to you. The back up pads are designed to be attached to hand held power tools called orbital sanders. These pads are going to be sold as replacement pads since the sanders’ original pads can wear out over time. The pad is attached to the power tool and a sandpaper disc is then attached to the pad either by glue or by using a hook and loop system. The pads come either with a vinyl surface for attaching a sticky disc that glues to the pad or a…
N256143 · 2014-09-05 — The tariff classification of parts for power tools from China
The parts that you are importing are a housing and two sleeves used on three types of handheld pneumatic tools. The housing, Part number 500957, fits on the Framing Stapler/model number S200-S16 Standard Crown (1/2”). Part number 501283 is a sleeve which fits into the PowerMaster Plus Strip Nailer/model number F-350S. The other sleeve, part number 511119, fits on the Strip Nailer/model number PF350-S. The housing and the sleeves are made of cast magnesium and are specifically designed for use with the above named pneumatic power tools. They cannot be used on any other type of machine. The…
N221455 · 2012-07-11 — The tariff classification of Oscillating Tool Accessories from China
The imported articles designed for use with hand-held Oscillating Tool are as follows: 1) Rigid Scraper Blade – Menards SKU #2360963. It is made of carbon steel with a sharpened, non-serrated cutting edge. The blade when attached to the Oscillating Tool can remove old vinyl, wood or other floor coverings and cuts carpet. It can also remove paint and other thick coatings. 2) The Sandpaper Backing Pad Attachment – Menards SKU #2360980 is constructed primarily of plastic and foam. The backing pad provides a base for sandpaper sheets to be attached to the Oscillating Tool so it can be used as a…
N211598 · 2012-04-25 — The tariff classification of a High Speed Sanding Pad Set from Hong Kong
, you requested a tariff classification ruling. The High Speed Sanding Pad Set, Part Number 2525PV, is made of hard vulcanized plastic. The pads are imported in a package containing one pad each of the following sizes, i.e., 3”, 4.5” and 5.5”. The pads are designed to be used on 5 inch high speed sanders with a maximum rated speed of 20,000 rpm. They function as a means of support for the sand paper (not included with the pads). Each round pad features a hole in the center. Once the sandpaper is placed against the pad, a metal arbor (bolt) is inserted through this hole in order to affix the…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product