Presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork
R01629 · 2005-03-21 — The tariff classification of Boot Application Machines from the United Kingdom
The Boot Application Machines, Models PS-1000 and PS-2000, are used to install Postsaver Boots onto the in-ground portion of wooden posts. Model 1000 has half the production capacity of the 2000. The boot is a non-toxic, environmentally friendly barrier designed to protect lumber used in below ground applications. The boot consists of a heavy-duty polyethylene sleeve that is completely coated on the inside with bitumen, a tar-like protective wood coating. The bitumen coating forms a protective seal on the wood while the exterior polyethylene sleeve also serves to protect the wood by providing…
806782 · 1995-03-06 — The tariff classification of a straw press machine from England
You submitted literature describing the Stramit machine which is used to make rigid building panels from waste straw or similar fibrous materials. The machine features a bale opener, straw cleaner, board former, board run out, cut-off saw and end sealer. Bales of straw are fed on a conveyor through the bale opener and straw cleaner in order to remove chaff and other unwanted elements. The straw then enters the press where it is both compressed and subjected to heat at a temperature of up to 250 degrees Centigrade. As a result of the compression and heat, the straw releases a natural "resin"…
805163 · 1995-01-09 — The tariff classification of a press and pulling stations from Germany
Your firm intends to import a press for the manufacture of engineered lumber. While your inquiry does not specifically describe the press, it appears that it will be used to agglomerate wood fibers or chips into a continuous wood beam or similar structural wood product. It will utilize pressure applied by endless forming bands, as well as heat, to accomplish this task. A pulling station, according to your letter, is designed to pull finished wood products from the press. It is constructed from two thick steel plates, top and bottom tractor conveyor belts, and hydraulic cylinders. The…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product