Other molds
Part of: 84807990 — Other
N301173 · 2018-11-13 — The tariff classification of Molds from China
You are importing two complete molds that consists of two parts each and weighs approximately 1000 pounds and the other weighs 500 pounds. The molds consists of two parts made of casted aluminum which is then machined by CNC (computer numerical control) and used for plastic roto-molding. When the molds are assembled with a male and a female end there is a space left between them which is then filled with polyethylene plastic powder and then the molds are closed. The aluminum parts are surrounded with a steel frame that allows for the entire mold to be attached to a 360 degree rotating arm and…
N099877 · 2010-04-29 — The tariff classification of lens production machines from China
The items in question, i.e., a filling unit, a curing unit and molds, will be used to produce ophthalmic spectacle lenses. The molds cannot be used to produce contact lenses. The filling and curing units are not physically attached or connected. They are designed to be placed on a storage cabinet (not included at time of importation) that holds an inventory of various molds. Samples of the separately packaged molds and a demonstrational video were provided for examination. The filling unit is operated manually as follows: (1) a pre-measured foil pouch containing proprietary resin is placed in…
J89911 · 2003-11-07 — The tariff classification of plastic molds containing dry unfinished contact lenses from England
The two part plastic mold is manufactured from polypropylene in an injection-molding machine. The dry contact lens is produced in this mold. At this stage, the dry contact lens is considered to be in an unfinished state. In addition to being used to produce the lens, the mold serves to retain the unfinished dry contact lens in its predetermined shape and to hold it in place until the lens is hydrated after importation. After importation, the plastic mold containing the unfinished dry contact lens receives further processing at your firm’s local manufacturing facility. The processing begins…
h81137 · 2001-05-24 — The tariff classification of plastic molds containing dry unfinished contact lenses from England.
Samples have been provided. The mold is made of polypropylene in two parts on an injection molding machine. The lens is produced in this mold and the mold later serves to retain the unfinished dry contact lens in a predetermined shape and hold it in place until it is hydrated after importation. The mold is placed in a filling and closing machine which dispenses a solution called “Hema” (hydroxyethyl methacrylate) into the concave half of the plastic mold. The convex portion of the mold is then applied and clamped into place after which the material is cured in an oven causing the lens to…
810729 · 1995-06-14 — The tariff classification of equipment for a molding plant from Italy
Your client will be involved in establishing a plant which will recycle up to 2.5 million scrap tires per year and manufacture consumer products from the resulting materials. The plant will consist of numerous machines of both domestic and foreign origin. Some of the equipment used in the recycling operation is the subject of a separate ruling, file number NY 810386. This ruling is concerned with equipment which will be used to mold granules generated from the tire recycling operation into flooring tiles and flooring rolls. In a telephone conversation with a member of my staff, Mr. Roberto…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product