8482 91 00 40

Code

8482 91 00 40

Type

10-digit tariff line

Duty rate

4.4% (set at subheading 84829100)

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• f88005 · 2000-07-07 — The tariff classification of an Outboard Retainer, a Steel Circlip, a Retaining Ring, a Roller B Forging, a Holder Forging, and a Needle Roller from Japan

  You submitted tagged samples as well as drawings and pictures of these items to demonstrate how they are used together. You state that all the items included in this request are made of steel. Item A is an Outboard Retainer, which is a roller/holder. It will be imported as a solid piece and the holes will be made in the U.S. It will be used in the universal joint on the outboard side of the drive shaft. The following pieces will be used in the universal joint on the inboard side of the drive shaft. Item B is a Steel Circlip. Item C is a Retaining Ring used to hold the rollers in place. Item D…

• 960834 · 1997-08-15 — IA 22/97; Cylindrical Rollers; Cam Followers; T.D. 94-22;Section XVI, Note 2

  FACTS: The merchandise consists of cylindrical rollers which are used in cam followers. It is our understanding that the cam followers are used in such products as valves, ball transfers, automotive "cv" joints, and games. ISSUE: Whether the cylindrical rollers are classifiable under subheading 8482.91.00, HTSUS, as rollers. LAW AND ANALYSIS: Classification of merchandise under the HTSUS is in accordance with the General Rules of Interpretation (GRI's). GRI 1 provides that classification is determined according to the terms of the headings and any relative section or chapter notes. The…

• 953560 · 1993-07-06 — Protest No. 3001-92-100777; Stainless Steel Polished Hollow Balls; Chapter 84, Note 6; 8431.39.00; 7326.90.90

  The following is our decision regarding the request for further review of Protest No. 3001-92-100777 concerning your action in classifying and assessing duty on stainless steel polished hollow balls under the Harmonized Tariff Schedule of the United States (HTSUS). FACTS: The merchandise consists of 1 inch stainless steel polished hollow balls, dedicated to use for cargo ball transfer units. In Customs Laboratory Report no. 8-93-20223-003, dated January 15, 1993, the San Francisco, California, Laboratory determined that with a nominal diameter of 2.54 mm, the steel balls differ from the…

• 8482 91 00 10 — Balls: — Of alloy steel
• 8482 91 00 15 — Balls: — Of copper or copper alloys as described in statistical note 8 to this chapter
• 8482 91 00 30 — Balls: — Other
• 8482 91 00 50 — Tapered rollers
• 8482 91 00 70 — Spherical rollers
• 8482 91 00 80 — Other cylindrical rollers
• 8482 91 00 90 — Other

• 848291 — ТН ВЭД ЕАЭС: шарики, игольчатые ролики и ролики
• 848291 — EU CN/TARIC: Parts — Balls, needles and rollers

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.