Other
Part of: 85015140 — Exceeding 74.6 W but not exceeding 735 W
N321561 · 2021-09-24 — The tariff classification of electric drive motors from Japan
The merchandise under consideration is identified as the Power Steering Motor Control Units (MCU), which are described as permanent magnet, three-phase, synchronous, AC motors, each having an integrated controller, position sensor, and a power inverter. You state that the five motors are all similar in construction and function, having a maximum rated output of either 475 Watts or 477 Watts and are intended for use in steering systems of consumer and commercial vehicles. In your letter, you state that the MCUs receive 12VDC electricity directly from the vehicle and the internal inverter…
N148847 · 2011-03-06 — The tariff classification of a drive assembly
The item concerned is referred to as the Drive Combo L8-80. This drive assembly is the mechanism that drives/spins the rotor of a centrifuge. It consists primarily of an oil cooled electric motor, with a centrifuge chamber base incorporated onto its housing, and a spindle assembly connected to its rotor. The electric motor is a fractional horsepower, 400 W, three phase AC motor. The applicable subheading for the Drive Comb L8-80 will be 8501.51.4040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Electric motors…: Other AC motors, multi-phase: Of an out put not…
L87605 · 2005-11-15 — The tariff classification of an elevator traction machine from China
NY L87605 November 15, 2005 CLA-2-85:RR:NC:N1:112 L87605 CATEGORY: Classification TARIFF NO.: 8501.51.4040 Tim Allwine Import Manager, Schenker, Inc. Indianapolis Branch 2375 Hadley Road Plainfield, IN 46168-7482 RE: The tariff classification of an elevator traction machine from China Dear Mr. Allwine, In your letter dated October 7, 2005, you requested a tariff classification ruling on behalf of Otis Elevator Company of Bloomington, Indiana. The item concerned is the Gearless Elevator Traction Machine. It is comprised of a three-phase, permanent magnet, AC motor; brakes and an electronic…
K89436 · 2004-10-05 — The tariff classification of furnace burners and components from Slovenia, China and Italy
You plan to import three foreign-sourced components into a Foreign Trade Zone and use them in the manufacture of furnace burners for liquid fuel. The fully assembled burners will then exit the FTZ and enter the commerce of the United States. You will be applying for non-privileged foreign status and request confirmation of the classification of the components and that once assembled into a burner unit they will assume the classification and duty rate of the completed unit. Literature has been provided for the furnace burners. The Becket furnace burners, models NX, AFII, CF1400, AFG and SF are…
K82935 · 2004-02-24 — The tariff classification of a multi-function electromechanical tool from France
Literature for French versions of the FLEXXI Tronic power tool has been provided. The American model will be a 110 volt version with a power of 225 watts. The FLEXI Tronic tool will be imported as a kit and used for polishing, deburring, sculpting, etc. of metal, plastic, wood and other materials. The kit will include a motor with its speed controller and flexible shaft attached, a rotary handpiece with 3 collets of different sizes, a reciprocating handpiece, and a combination pin and wrench (9mm spanner) for securing end tools to the handpieces. You have indicated by telephone that the…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product