Exceeding 750 W but not exceeding 14.92 kW
Part of: 850152 — Other AC motors, multi-phase: — Of an output exceeding 750 W but not exceeding 75 kW:
N356179 · 2025-12-15 — The tariff classification of stator and rotor pairs from Mexico
The merchandise under consideration is identified as unassembled electric motors, referred to as “stator and rotor pairs”, for food waste disposers, SKU numbers 81202, 81202B, 81202N, 81202P, and 16295B. The stators and rotors are separately packed and imported on the same shipment to the United States for assembly into a functional electric motor. In Mexico, the stators are produced from steel that is stamped into laminations and stacked. Slot liners are then inserted, and windings are wrapped around the core. The windings are then secured with polyester lacing to prevent movement, and lead…
N313870 · 2020-09-02 — The tariff classification of electric drive motors from Japan
The merchandise under consideration is identified as the Cargo Door Hinge Power Drive Units, Part Numbers 734-15610-XX and 732-13650-XX (Hinge Drive Units), and the Main Deck Cargo Door Power Drive Unit, Part Number 734-06400-XX (Main Deck Drive Unit). The Hinge Drive Units are described as three-phase electric AC motors that are used to actuate the cargo door of aircraft. Both motors have attached reduction gearing and can be manually actuated during electrical or motor failures. Based on the information provided, the Hinge Drive Unit motors are rated at 746 W output. The Main Deck Drive…
N270659 · 2015-11-24 — The tariff classification of AC multi-phase motors from China
The items in question are referred to as NEMA D design electric motors (Model numbers NEH256T, NEH284T, NEH286T, NEH324T, NEH326T, NEH365T, NEH404T, NEH405T, NEH444T, NEH445T, and NEH447T), and NEMA B design electric motors (Model numbers NSH256T, NSH284T, NSH286T, NSH324T, NSH326T, NSH364T, NSH365T, NSH404T, NSH405T, NSH444T, NSH445T, and NSH447T). All of the motors are said to be multi-phase AC Electric Motors used for oil pumping units with a maximum output ranging from 7.48 kW to 111.9 kW. In your letter, you have provided the output for each model number as it is measured in horsepower.…
H251034 · 2015-10-21 — Application for Further Review of Protest Number 2006-13-102409; Tariff classification of motor spindles
The following is our decision regarding the Application for Further Review (AFR) of Protest Number 2006-13-102409, timely filed on November 19, 2013, by counsel on behalf of DMG Mori Seiki USA, Inc. (DMG). The AFR concerns the classification of motor spindles designed for use in milling machine tools under the Harmonized Tariff Schedule of the United States (HTSUS). Our decision takes into consideration additional information provided to this office by DMG via email dated, August 31, 2015, as well as follow up information emailed to this office on September 10, 2015. FACTS: The instant AFR…
J89367 · 2003-09-30 — The tariff classification of an actuator
The merchandise is an all-electric actuator used on large engines and turbines to control the position of fuel racks and valves. The actuator consists of a 3-phase AC motor with a reduction gearbox. The model numbers are EM-80 and EM-300. From the specifications given, the actuator has a maximum output of approximately 12 kW. The applicable subheading for the actuator will be 8501.52.4000, Harmonized Tariff Schedule of the United States (HTS), which provides for AC motors, multi-phase, of an output exceeding 750 W but not exceeding 14.92 kW. The rate of duty will be 3.7% ad valorem. This…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product