Ballasts for discharge lamps or tubes
N158756 · 2011-04-25 — The tariff classification of a lamp-holder and ballast from China.
, Incorporated. The merchandise under consideration is a Lamp-holder (Item # 1369R) and a Self-Ballasted Lamp Adapter (Item # 1118). Samples of each item were submitted with your ruling request and will be returned to you. Item # 1369R is a medium base lamp-holder suitable for installation onto two single conductors of insulated #14 AWG (American wire gauge) stranded wire. It is an assembly consisting of a plastic housing. It has an internally threaded center with metal contact tabs for accepting a medium base screw-type lamp at one end and two terminal pins under a quick-connect pivot cap at…
N157776 · 2011-04-21 — The tariff classification of ballasts from China
The merchandise subject to this ruling is ballasts. They are identified within your letter as Part Numbers FEP-120-232-T8, FEP-120-270-T8, and FEP-120-272-T12HO. These ballasts are used in refrigeration applications. They are electric rapid start ballasts for rapid start fluorescent lamps for refrigerated display applications. The display lighting lamp lineups are mounted on the refrigeration door frame structure within lensed enclosures on the freezer compartment side. The ballasts are to be mounted within frame raceways. You suggested Harmonized Tariff Schedule of the United States (HTSUS)…
N119322 · 2010-08-29 — The tariff classification of LED lamps and a ballast/power supply from South Korea.
Under consideration are an LED Tube Driver and four LED (light emitting diode) lamps, namely the LED A lamp, the LED MR16 lamp, the LED Par30 lamp, and LED T8 lamp. These LED lamps utilize LED technology for the light source, and are replacement lamps for traditional incandescent, halogen, or fluorescent lamps. The LED A lamp is a replacement lamp for traditional A-series incandescent or halogen lamps. It measures approximately 4¼ inches high by 2? inches in diameter, and features a finned aluminum housing to promote heat dissipation. The lamp provides an E26 base for use with a standard…
N103956 · 2010-05-18 — The tariff classification of a power module and a lamp module from Mexico
The merchandise subject to this ruling is a power module and lamp module. The power module and the lamp module are subassemblies of a 9100 Series HID light fixture. The power module consists of a ballast and electrical cables. The ballast is encapsulated in a resin pod to eliminate all water entry. From the information you provided, the lamp module is a cylindrical metal housing measuring approximately 18 inches tall with a diameter of approximately 12 inches. It consists of several metal parts with a lamp-holder, lens and gasket. This fixture is designed as a flush mounted up-light for use…
N070406 · 2009-08-17 — The tariff classification of a DC ballast from China
The merchandise subject to this ruling is a 35w regular sized DC ballast. It is identified within the product literature as Model KA318. The ballast is an aluminum alloy transformer/ballast and will be used primarily as an electronic control gear for xenon light bulbs. The Vin is DC9-16-32V. This product, which is waterproof and shockproof, features a direct current (DC) output, a wider range of lighting voltage, prolonging the working life of all kinds of bulbs, a high/low temperature and humidity environment endurance, as well as open and short circuit protection. The applicable subheading…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product