Push-button: — Rated at not over 5 A — Momentary contact
Part of: 85365090 — Other: — Other
N339201 · 2024-04-18 — The tariff classification of a pushbutton switch from China
The merchandise under consideration is referred to as the Nurse Call Alarm Cord (pushbutton switch), which is described as an enclosed handheld momentary contact switch that is attached to a 3 m electrical cable and a 6.35 mm mono plug on the other end. The pushbutton switch is said to be universally compatible with most commercial nurse call systems. In use, the pushbutton switch would be connected to a nurse call system that is designed to alert nurses in case of a medical emergency or a need for care. When the pushbutton switch is pressed, the electrical current flows uninterrupted to the…
N309858 · 2020-02-26 — The tariff classification of a pushbutton switch from China
The merchandise under consideration is referred to as a corded pushbutton switch, which is described as an enclosed handheld momentary contact switch that is attached to a 3 m electrical cable and a 6.35 mm mono plug on the other end. You state this pushbutton switch has a maximum power rating of 115 Watts and 1 Ampere. The subject pushbutton switch is said to be compatible with most commercial nurse call systems that are used in hospitals or nursing homes. In use, the pushbutton switch cord cable would be connected to a nurse call system that is designed to alert nurses in case of a medical…
N296875 · 2018-06-05 — The tariff classification of a vehicle clamp assembly and electrical switches from South Korea
The first item under consideration is identified as the “S LF O/MOLD & C/PLATE B-D/M FLH PSA EXP” (clamp assembly), Product Number 2607036B. The clamp assembly functions to support a window in a vehicle as it is raised and lowered. It is mounted to the guide rail on a vehicle’s inner door panel. The parts used to make this clamp assembly consist of a plastic mold plate, a metal clamp and a rubber clamp seal. The plastic mold plate connects to the rail guide mechanism and moves up and down. The metal clamp is connected to the mold plate and holds the rubber clamp seal that grips the window.…
N295313 · 2018-04-17 — The tariff classification of a vehicle hood latch and touch pad sensor from South Korea
, Ltd. The first article under consideration is identified as JL Hood Catch, product number 2590972B. It is used to prevent the vehicle hood from opening. The catch mechanism includes a metal wire that is attached to a metal pin, spring, bush, snap ring and lever-pin. The wire attaches to a metal stud to perform the fastening function of the catch. A molded plastic housing covers the latching mechanism. This hood catch is attached to the outside of the vehicle. It is place on the edge of the hood on the side of the vehicle, near the front. You suggested that the JL Hood Catch be classified in…
N269120 · 2015-10-07 — The tariff classification of the Outside Handle & Switch Assembly-Tail Lid from Korea
Sample is being returned. The merchandise under consideration is referred to as the “Outside Handle & Switch Assembly-Tail Lid.” This switch assembly consists of the push-button micro switch, the actuator with corresponding hardware, the assembly body, and the rubber cover. The switch assembly is intended to be mounted on the trunk of a motor vehicle for the purpose of releasing the lid latch. In use, a person would depress the rubber cover causing the actuator to momentarily depress the electrical contacts, which send an electrical signal to open the door latch. The applicable subheading for…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product