Terminals, electrical splices and electrical couplings; wafer probers
Part of: 853690 — Other apparatus:
N356071 · 2025-11-24 — The tariff classification of terminal blocks from Korea
The merchandise under consideration is described as a Direct Current (DC) Terminal Block, which is individually identified by the model numbers listed below: SG-DC(HC)-4P SG-DC(HC)-6P SG-DC(HC)-10P SG-DC(HC)-15P SG-DC(HC)-20P SG-DC(HC)-25P The subject devices are comprised of a plastic body with multiple screw down terminals. The number of terminals varies from 4 to 25, as reflected by the numbered identifier in the model (i.e. 4P, 6P, etc.). The individual terminals are made of brass terminal pins and steel bolts. The subject terminal blocks are rated at 250V and are used inside control…
N353781 · 2025-10-01 — The tariff classification of probe pins from South Korea
The merchandise under consideration is described as a Micro-Electrical Mechanical System (MEMS) probe pin, which you state is an electrical contact terminal used with probe cards. A probe card is a device that tests the quality of semiconductor wafers and chips, checking for defects. The subject pin is composed of palladium cobalt, gold, palladium, copper, and rhodium and measures 4.4 millimeters in length and 56 micrometers in diameter. The pin, when attached to the probe card, makes direct electrical contact with the wafer or chip that is being tested. In your request, you suggest that the…
N337990 · 2024-03-05 — The tariff classification of electrical splices from Mexico
There are three items under consideration that are referred to as Solder Sleeve Shield Terminations. The first item, identified as the Solder Sleeve, PN 775210N006, consists of a heat-shrinkable insulation sleeve made of polyvinylidene fluoride, a solder preform ring with flux, and meltable rings made of thermoplastic material. The second item under consideration is identified as the Solder Sleeve, PN 065762-000, which consists of a heat-shrinkable insulation sleeve made of polyvinylidene fluoride, a solder preform ring with flux, meltable rings made of thermoplastic material, and a…
N337191 · 2024-01-09 — The tariff classification of contact pins from Switzerland and Mexico
The two items under consideration are referred to as Contact Pins and Matching Sockets, which are described as formed copper alloy electrical pins that are fitted/inserted into electrical sockets, connectors, and other types of electrical connections. The Contact Pins are constructed of copper alloy in the form of male type contact, while the Matching Sockets are constructed of copper alloy and are in the form of a female type contact. The contact pins and sockets are rated at less than 1,000 V. In your letter, you provide two configurations for each Contact Pin and Matching Socket. In the…
N330426 · 2023-02-08 — The tariff classification of printed circuit board (PCB) mounted terminal blocks from Germany
The first item under consideration is identified as the PCB Terminal Block, PN 2604-1102, which is described as a push-in, lever actuated terminal block having a plastic body and three termination sockets where solid and/or ferruled conductors can be inserted and clamped into position. The PCB Terminal Block, PN 2604-1102, is rated at 400 V and is equipped with electrical contacts where the device is soldered onto a PCB. The second item under consideration is identified as the PCB Terminal Block, PN 2606-1102. Similar to the previous terminal block, PN 2606-1102 is also described as a…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product