Cotterless-type crank sets and parts thereof
Part of: 871496 — Other: — Pedals and crank-gear, and parts thereof:
N317240 · 2021-02-18 — The tariff classification and 301 determination of Bicycle Cranksets assembled in Taiwan from Taiwanese and Chinese components
The items under consideration have been identified as three (3) cranksets assembled in Taiwan, from components sourced from China and Taiwan. The finished goods are identified by their part numbers: 78700063 (S150 crankset with 50T and safety guard) 78700049 (S150 crankset with 50T no guard) 78700145 (S250 crankset with 50T and safety guard) A Bill of Materials (BOM) for each finished good was included in the attachment documents, along with systematic processes of assembly. Part #78700063 (S150 crankset with 50T and safety guard) consists of a sprocket, crank, safety guard, and fasteners. In…
H243595 · 2016-08-17 — Modification of CBP Ruling NY K81790 (February 3, 2004), CBP Ruling NY K80388 (November 13, 2003), and CBP Ruling HQ 083052 (April 21, 1989); Tariff Classification of Bicycle Chainrings and Cranks; Harmonized Tariff Schedule of the United States subheading 8714.96.50
This letter responds to your June 3, 2013 request for reconsideration of Customs and Border Protection (CBP) Ruling NY K81790 (February 3, 2004) on behalf of SRM Service Center. The request concerns the legal tariff classification under the Harmonized Tariff Schedule of the United States (“HTSUS”) of SRM’s chainrings and cranks that are part of its cycling power meter system. The other components considered under NY K81790 are not affected in this ruling. In addition to NY K81790, we find that CBP Ruling NY K80388 warrants reconsideration for reasons discussed below in the FACTS section, and…
R02437 · 2005-08-18 — The tariff classification of bicycle parts from Taiwan
The merchandise is bicycle parts. Item number 1 is a Cartridge Bottom Bracket, which is the part of a bicycle around which the pedal cranks revolve. It measures 68 mm in diameter and 110.5 mm long. Item number 2 is a Triple Chainwheel Crank Set, which consists of two cranks, three chainwheels, and bolts the that connect them. The crankset connects the pedal to the bottom bracket. The cranks measure 175 mm long; the chainwheels are 22 tooth, 32 tooth and 44 tooth. Item number 3 is a Bicycle” V-Brake” Alloy Front Brake. It is a direct-pull cantilever brake, which consists of two arms, one with…
863209 · 1991-05-23 — The tariff classification of bicycle parts and chain fromJapan and Taiwan
You have submitted descriptive and illustrative literature (including specification sheets). The merchandise to be imported is the following: l. Various models of front and rear derailleur sets, with a cable made of metal and with a plastic outer casing. The country of origin is Japan. a. Suntour XLM models # RD-XM01-GXB and # FD- XM01-GXH b. Shimano 200 GS models # RD-M200-SGS and # FD-M200 c. Shimano 400LX models # RD-M400-SGS and # FD-M400 d. Shimano Deore DX models # RD-M650-SGS and # FD-M650 2. Various models of two piece cotterless crank sets, made of aluminum. The country of origin is…
083052 · 1989-04-21 — Internal advice request No. 34/88 concerning the tariff classification, marking and allowance for American parts of crank sets for bicycles.
This request for internal advice was filed on behalf of Assemble In Mexico, Inc., in your undated memorandum which was forwarded to Headquarters on October 26, 1988. FACTS: The imported article will be used as parts of a crank set for bicycles. A crank arm blank will be imported into Mexico from Japan. The crank arm blank is a tubular article approxi mately 8 inches long with a 1 inch x 1/2 inch cross section. Each end of the blank has an open circular cut out across the cross section. There is also a smaller cut out circle near one end of the blank. Three tubular pieces which are to be…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product