Measuring not over 50 mm in width or diameter
Part of: 910990 — Other:
b88343 · 1997-09-05 — The tariff classification of clock movements from China
, you requested a tariff classification ruling on a clock movement. The clock movement will be combined with a bell, a face, and a dial and will function as a long ring bell timer in various appliances or as a kitchen bell timer. The clock movement will not be imported with the striker arm, which strikes the bell in the kitchen bell timer. The movement measures approximately 14 mm in thickness when measured from plate to plate and approximately 49 mm in width. It is a complete clock movement for tariff purposes. The applicable subheading for the clock movement will be 9109.90.2000, Harmonized…
a81977 · 1996-04-15 — The tariff classification and marking of a plastic dial, plastic housing and a timer movement from China.
, you requested a tariff classification ruling. You have submitted items which will be imported separately as parts. The parts consist of a plastic dial, plastic housing and a clock movement. The components will be assembled into timers when fully imported. The applicable subheading for the plastic dial will be 9114.30.8000, Harmonized Tariff Schedule of the United States (HTS), which provides for Other clock or watch parts: Dials: Exceeding 50 mm in width. The rate of duty will be 5.7% ad valorem. The applicable subheading for the plastic housing will be 9112.90.0000, Harmonized Tariff…
950295 · 1991-11-06 — Burner Bowls; "Ventilating Hoods"; Burners; Clock Movements; EN 84.14 (C)
FACTS: The subject burner bowl is constructed for use in electric ovens. It is the removable grease pan normally found under the heating element of a range top. The "ventilating hood", as you describe the item, is listed in the submitted literature as a part of the "Flexivent" through-the-wall residential gas heater. The third item is a burner used in a gas water storage heater. The final item is a clock movement for a kitchen timer. The movement will be part of a completed product used to time activities of short duration. The user turns the dial to the appropriate number of minutes, and a…
084956 · 1989-10-11 — Mechanical clock movement for a timer switch
In a letter of June 13, 1989, you requested that we reconsider the classification of a mechanical clock movement which was the subject of a ruling letter of April 10, 1989 (file 839138). FACTS: The article is a clock movement and was described in the letter of April 10, 1989 (file 839138) as a "mechanical no (0) jewel clock movement with a metal housing enclosing a mainspring, pinions, gears, arbor, other metal parts and a balance wheel * * * measures under 50 mm wide and over 12 mm thick." The article in question was clearly and correctly described in that letter. It is a complete and…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product